Faculty Members

Dr.bjad khalaf Nasser Albudairy

رخصة محترف قياس مؤشرات الأداء الرئيسية ®C-KPIP من معهد مؤشرات الأداء الرئيسية (KPI Institute) - يوليو 2022 م. Associate Professor Department of Pharmaceutics College of Pharmacy AL-Kharj

Kharj
011-588-1210
b.almutairy@psau.edu.sa

Curriculum Vitae
Publications

Publications

1. B. K. Almutairy. Application of quality-by-design approach to quantify the effects of water amount and massing time on key granules and tablets characteristics of high-dose formulation of metformin hydrochloride prepared by moisture activated dry granulation technique. Under publication process (2020).
2. Almutairy BK, Alshetaili AS, Ashour EA, Patil H, Tiwari RV, Alshehri SM, Repka MA. Development of a floating drug delivery system with superior buoyancy in gastric fluid using hot-melt extrusion coupled with pressurized CO2. Die Pharmazie-An International Journal of Pharmaceutical Sciences. 2016 Mar 1;71(3):128-33.
3. A. S. Alshetaili, B. K. Almutairy, R. V. Tiwari, J. T. Morott, S. M. Alshehri, X. Feng, B. B. Alsulays, J. Park, F. Zhang, and M. A. Repka, “Preparation and Evaluation of Hot-Melt Extruded Patient-Centric Ketoprofen Mini-Tablets”, Curr. Drug Deliv., 2015.
4. A. S. Alshetaili, B. K. Almutairy, S. M. Alshahrani, E. A. Ashour, R. V. Tiwari, S. M. Alshehri, X. Feng, B. B. Alsulays, S. Majumdar, N. Langley, K. Kolter, A. Gryczke, S. T. Martin, and M. A. Repka, “Optimization of hot melt extrusion parameters for sphericity and hardness of polymeric face-cut pellets,” Drug Dev. Ind. Pharm., vol. 9045, no. July, pp. 1–9, 2016.
5. E. A. Ashour, V. Kulkarni, B. Almutairy, J. Park, S. P. Shah, S. Majumdar, Z. Lian, E. Pinto, V. Bi, T. Durig, S. T. Martin, and M. A. Repka, “Influence of pressurized carbon dioxide on ketoprofen-incorporated hot-melt extruded low molecular weight hydroxypropylcellulose”, Drug Dev. Ind. Pharm., vol. 00, no. 00, pp. 1–8, 2015.
6. B. B. Alsulays, V. Kulkarni, S. M. Alshehri, B. K. Almutairy, E. A. Ashour, J. T. Morott, A. S. Alshetaili, J.-B. Park, R. V. Tiwari, and M. A. Repka, “Preparation and evaluation of enteric coated tablets of hot melt extruded lansoprazole,” Drug Dev. Ind. Pharm., vol. 9045, no. August, pp. 1–29, 2016.
7. S. M. Alshehri, J. Park, B. B. Alsulays, R. V Tiwari, B. Almutairy, A. S. Alshetaili, J. Morott, S. Shah, V. Kulkarni, S. Majumdar, S. T. Martin, S. Mishra, L. Wang, and M. A. Repka, “Mefenamic acid taste-masked oral disintegrating tablets with enhanced solubility via molecular interaction produced by hot melt extrusion technology” J. Drug Deliv. Sci. Technol., vol. 27, pp. 18–27, 2015.
8. Sultan M. Alshehri, Roshan V. Tiwari, Bader B. Alsulays, Eman A. Ashour, Abdullah S. Alshetaili, Bjad Almutairy, Jun-Bom Park, Joseph Morott, Bhupinder Sandhu, Soumyajit Majumdar, and Michael A. Repka, “Investigation of the combined effect of MgO and PEG on the release profile of mefenamic acid prepared via hot-melt extrusion techniques”, Pharm. Dev. Technol., 2016.
Published Abstracts at National Conferences in USA:
1. A. M. Almotairy, B. K. Almutairy, M. S. Almutairi, S. Bandari, M. Chougule, M. A. Repka. Development and Characterization of Microporous Particles of Theophylline via Hot Melt Extrusion Technology. The AAPS Journal Suppl., San Diego, CA (2017).
2. M. Almutairi, B. Almutairy, E. Ashour, S. Sarabu, S. Bandari, D. Kim, A. Batra, D. Tewari, T. Durig, M. Repka. Feasibility of Aquasolve™ HPMC-AS LG utilizing Hot-Melt Extrusion: Effect of Pressurized-CO2 on the Physico-Mechanical Properties. The AAPS Journal Suppl., San Diego, CA (2017).
3. M. Almutairi, A. Almotairy, B. Almutairy, B. Alsulays, D. Kim, A. Gryczke, K. Kolter, N. Langley, M. Repka. Influence of H-bonding Interactions in Hot-Melt Extrudates on Dissolution Profiles of Poorly Water-Soluble APIs. The AAPS Journal Suppl., San Diego, CA (2017).
4. B. K. Almutairy, A. S. Alshetaili, M. S. Almutairi, M. A. Almaghrabi, S. M. Alshehri, R. V. Tiwari, M. A. Repka. Development and Characterization of a Floating Drug Delivery System Prepared via Hot-Melt Extrusion Technology Coupled with Pressurized CO2 for a Thermo-Labile API. The AAPS Journal Suppl., Denver, CO (2016).
5. M. Almutairi, B. Almutairy, B. Alsulays, A. Saragih, D. Kim, A. Gryczke, K. Kolter, N. Nigel Langley, M. Repka. Physicochemical Characterization of Polyvinylpyrrolidone-Based Solid Dispersions Prepared by Hot-Melt Extrusion. The AAPS Journal Suppl., Denver, CO (2016).
6. M. A. Almaghrabi, P. Sharma, V. K. Shankar, B. K. Almutairy, N. Murthy. Preparation and Characterization of Acitretin Loaded Niosomes for Psoriasis Treatment. The AAPS Journal Suppl., Denver, CO (2016).
7. B. K. Almutairy, A. S. Alshetaili, E. A. Ashour, S. M. Alshehri, H. Patil, R. V. Tiwari, M. K. Almutairi, M. A. Repka. Development and Characterization of Porous Ethyl Cellulose EC-N7, Eudragit® RS PO and Eudragit® RL PO Utilizing Hot-Melt Extrusion Technology Coupled with Pressurized Carbon Dioxide. The AAPS Journal Suppl., Orlando, FL (2015).
8. B. K. Almutairy, A. S. Alshetaili, E. A. Ashour, S. M. Alshehri, H. Patil, R. V. Tiwari, M. K. Almutairi, M. A. Repka. Development of a Floating Drug Delivery System with Superior Buoyancy in Gastric Fluid using Hot- Melt Extrusion Coupled with Pressurized CO2. The AAPS Journal Suppl., Orlando, FL (2015).
9. B. K. Almutairy, A. S. Alshetaili, S. M. Alshehri, E. A. Ashour, H. Patil, R. V. Tiwari, M. K. Almutairi, M. A. Repka. Development of a Sustained-Release Donepezil Hydrochloride Formulation with Improved Drug Content and Tablet Content Uniformity via Hot-Melt Extrusion Technology. The AAPS Journal Suppl., Orlando, FL (2015).
10. Sultan Alshehri, Bader Alsulays, Eman Ashour, Bjad Almutairy, Roshan Tiwari, Soumyajit Majumdar, Michael Repka. Formulation and Evaluation of Mefenamic Acid Sustained Release Tablets Containing Kollidon SR via Hot-Melt Extrusion Technology. The AAPS Journal Suppl., Orlando, FL (2015).
11. Sultan Alshehri, Bader Alsulays, Eman Ashour, Bjad Almutairy, Roshan Tiwari, J-B Park, Soumyajit Majumdar, Michael Repka. Investigation of the Combined Effect of MgO and PEG on the Release Profiles of Mefenamic Acid Utilizing Hot-Melt Extrusion Techniques. The AAPS Journal Suppl., Orlando, FL (2015).
12. E. A. Ashour, S. Alshehri, B. K. Almutairy, W. Lu, B. Beissner, Z. J. Lian, S. Porter, V. Bi, T. Durig, M. A. Repka. Influence of Pressurized Carbon Dioxide on High Melting Point Carbamazepine and Low Molecular Weight Hydroxypropylcellulose Matrices Using Hot Melt Extrusion. The AAPS Journal Suppl., San Diego, CA (2014).
13. A. S. Alshetaili, B. K. Almutairy, E. A. Ashour, S. M. Alshehri, W. Lu, J. B. Park, S. Majumdar, A. Gryczke, K. Kolter, N. Langley, S. Mishra, M. A. Repka. Solubility Enhancement of Poorly Water-Soluble Drugs with Kolliphor® P 407 Using Melt Extrusion Techniques. The AAPS Journal Suppl., San Diego, CA (2014).
14. S. M. Alshehri, B. Alsulays, E. Ashour, B. K. Almutairy, A. Alshetaili, J-B. Park, A. Gryczke, K. Kolter, N. Langley, S. Majumdar, M. Repka. Influence of Various Kollidon® Matrices and an Alkalizer on the Release of Hot Melt Extruded Mefenamic Acid. The AAPS Journal Suppl., San Diego, CA (2014).
15. B. K. Almutairy, A. S. Alshetaili, E. A. Ashour, S. M. Alshehri, J-B. Park, V. Kulkarni, M. A. Repka. Development of Sustained-Released Donepezil Hydrochloride Formulations with Various Carriers Utilizing Hot Melt Extrusion Technology. The AAPS Journal Suppl., San Diego, CA (2014).
16. Michael A. Repka, Abdullah S. Alshetaili, Xin Feng, Bjad K. Almutairy, Jun-Bom Park, Nigel Langley, Karl Kolter and Andreas Gryczke. Optimization of Hot Melt Extrusion Parameters for Sphericity and Hardness on Polymeric Face-Cut Pellets. CRS, Chicago (2014).
17. E. A. Ashour, B. Almutairy, V. Kulkarni, S. Alshehri, S. Shah, S. Majumdar, R. Bosworth, Z. John Lian, E. Pinto, V. Bi, T. Durig, M. A. Repka. Influence of Supercritical Carbon Dioxide on Ketoprofen-Incorporated Hot-Melt Extruded Low, Molecular Weight Hydroxypropylcellulose Matrices. The AAPS Journal Suppl., San Antonio, TX (2013).
18. E. A. Ashour, B. Almutairy, V. Kulkarni, A. Alshetaili, S. Shah, S. Majumdar, R. Bosworth, Z. John Lian, E. Pinto, V. Bi, T. Durig, M. A. Repka. Formulation Development and Characterization of Tablets Manufactured from Hot Melt Extrudates with Supercritical Carbon Dioxide Processing. The AAPS Journal Suppl., San Antonio, TX (2013).
19. A. S. Alshetaili, B. K. Almutairy, E. A. Ashour, V. I. Kulkarrni, J. B. Park, S. Majumdar, A. Gryczke, K. Kolter, N. Langley, M. A. Repka. Influence of Kolliphor® P Grades (Poloxamer) on Solubility and Stability of Hot Melt Extruded Kollidon® VA64 Drug Incorporated Matrices. The AAPS Journal Suppl., San Antonio, TX (2013).
20. S. M. Alshehri, S. M. Alshahrani, B. K. Almutairy, E. A. Ashour, V. Kulkarni, J-B. Park, S. Majumdar, A. Gryczke, K. Kolter, N. Langley, M. A. Repka. Combined Influence of Hot Melt Extruded Soluplus® and HPMCAS on Mefenamic Acid Drug Release. The AAPS Journal Suppl., San Antonio, TX (2013).
21. S. M. Alshehri, S. M. Alshahrani, B. K. Almutairy, E. A. Ashour, V. Kulkarni, J-B. Park, S. Majumdar, A. Gryczke, K. Kolter, N. Langley, M. A. Repka. Influence of Lutrol® F 68 and HPMCAS on Mefenamic Acid Release from Kollidon® VA64 Extrudates. The AAPS Journal Suppl., San Antonio, TX (2013).
22. A. S. Alshetaili, B. K. Almutairy, B. B. Alsulays, J. T. Morott, V. I. Kulkarni, J. B. Park, S. Majumdar, M. A. Repka. Formulation and Processing of Taste Masked Mini-tablets Prepared by Hot Melt Extrusion. The AAPS Journal Suppl., San Antonio, TX (2013).
23. S. M. Alshehri, S. M. Alshahrani, B. K. Almutairy, E. A. Ashour, V. Kulkarni, J-B. Park, S. Majumdar, M. A. Repka. Dispersible Tablet Formulation of Mefenamic Acid by Hot Melt Extrusion. The AAPS Journal Suppl., San Antonio, TX (2013).
24. A. S. Alshetaili, B. K. Almutairy, E. A. Ashour, B. B. Alsulays, S. N. Murthy, M. A. Repka. Influence of Hot Melt Extrusion Parameters on the Physicomechanical Properties of Various Polymeric Face-Cut Pellets. The AAPS Journal Suppl., San Antonio, TX (2013).
25. B. K. Almutairy, A. S. Alshetaili, E. A. Ashour, S. M. Alshehri, V. Kulkarni, J-B. Park, S. N. Murthy, S. P. Stodghill, M. A. Repka. Development of a Sustained-Release Donepezil Hydrochloride Formulation by Hot Melt Extrusion. The AAPS Journal Suppl., San Antonio, TX (2013).
26. M.A. Repka, S. Alshehri, S. Shah, S. Alshahrani, B. Almutairy, J. Morott, S. N. Murthy, S. Majumdar. Solubility Enhancement of Mefenamic Acid with Eudragit® EPO Using Melt Extrusion Techniques. The Controlled Release Society Annual Meeting and Exposition, Honolulu, Hawaii (2013).
27. A.S. Alshetaili, E.A. Ashour, B.K. Almutairy, S. Shah, S. Majumdar, M.A. Repka. Evaluation of the Physico-Mechanical Characteristics of Pellets of Different Polymer Prepared by Melt Extrusion/ Face-Cut Pelletization. The AAPS Journal. 14(S2), Chicago, IL (2012).
28. A.S. Alshetaili, E.A. Ashour, B.K. Almutairy, S. Shah, S. Majumdar, M.A. Repka. Formulation and Evaluation of Taste Masked Ketoprofen Pellets Prepared by Melt Extrusion/ Face-Cut Pelletization. The AAPS Journal. 14(S2), Chicago, IL (2012).
29. S. Alshehri, S. Alshahrani, B. Almutairy, S. Shah, S. Majumdar, M.A. Repka. Development and Evaluation of Taste-masked Formulations of Mefenamic Acid Using Hot Melt Extrusion Techniques. The AAPS Journal. 14(S2), Chicago, IL (2012).
30. B. K. Almutairy, A. S. Alshetaili, S. M. Alshehri, S. Shah, S. Majumdar, M.A. Repka. Development and Characterization of Taste Masked Acetaminophen Tablets with Ethyl Cellulose ECN7 and Klucel™ Utilizing Hot Melt Extrusion. The AAPS Journal. 14(S2), Chicago, IL (2012).

To call from inside the university 1200
To call from outside the university 011-588-1200
E-mail pr@psau.edu.sa
To request a service and open a fault report ithelp.psau.edu.sa

Dr.bjad khalaf Nasser Albudairy

Publications

Contact the university leaders

Administration of Public Relations and Media

Social

Faculty Members

Dr.bjad khalaf Nasser Albudairy

Publications

Administration of Public Relations and Media