Faculty Members

Prof.Mohamed Ibrahem Mohamed Abdelaal

Doctor of Philosophy in Mechanical Design and Production Engineering Professor Department of Mechanical Engineering College of Engineering in Wadi Addawasir

Wadi Aldawasir
011-588-8734
mi.abdelaal@psau.edu.sa

Curriculum Vitae
Publications

Publications

Nahed El Mahallawy Farouk A. Shehata, Mohamed Abd El Hameed, Mohamed Ibrahim Abd El
Aal, "Effect of Cu content and number of passes on evolution of microstructure and mechanical
properties of ECAPed Al/Cu alloys" Mater. Sci. Eng. A 517, pp.46–50 (2009).
2. Nahed El Mahallawy, Farouk A. Shehata, Mohamed Abd El Hameed, Mohamed Ibrahim Abd El
Aal, Hyoung Seop Kim,"3D FEM simulations for the homogeneity of plastic deformation in Al–
Cu alloys during ECAP" Mater. Sci. Eng. A 527, pp.1404–1410 (2010).
3. Seung Chae Yoon, Anumalasetty Venkata Nagasekhar, Ji Hoon Yoo, Mohamed Ibrahim Abd El
Aal, Majid Vaseghi, Hyoung Seop Kim, "Deformation Characteristics Evaluation of Modified
Equal Channel Angular Pressing Processes" Materials Transactions, Vol. 51, No. 1 pp. 46 – 50
(2010).
4. A. V. Nagasekhar, S. C. Yoon, J. H. Yoo, S.-Y. Kang,S. C. Baik, M. I. A. El Aal, H. S. Kim, "
Plastic Flow and Strain Homogeneity of an Equal Channel Angular Pressing Process Enhanced
through Forward Extrusion" Materials Transactions, Vol. 51, No. 5, pp.977 – 981 (2010).
5. Mohamed Ibrahim Abd El Aal, Nahed El Mahallawy, Farouk A. Shehata, Mohamed Abd El
Hameed, Eun Yoo Yoon, Hyoung Seop Kim,"Wear properties of ECAP-processed ultrafine
grained Al–Cu alloys" Mater. Sci. Eng. A 527, pp. 3726–3732 (2010).
6. Mohamed Ibrahim Abd El Aal, Nahed El Mahallawy, Farouk A. Shehata, Mohamed Abd El
Hameed, Eun Yoo Yoon, Jung Hwan Lee Hyoung Seop Kim" Tensile Properties and Fracture
Characteristics of ECAP-Processed Al and Al-Cu Alloys" Metals and Materials International, Vol.
16, No. 5, pp. 709~716 (2010).
7. Mohamed Ibrahim Abd El Aal, "Influence of the prehomogenization treatment on the
microstructure evolution and the mechanical properties of Al–Cu alloys processed by ECAP"
Materials Science and Engineering A 528, pp. 6946– 6957 (2011).
8. Mohamed Ibrahim Abd El Aal, "The effect of the prehomogenization treatment on the fracture
characteristics and wear properties of ECAPed Al–Cu alloys" Materials Science and Engineering
A 539, pp. 308–323 (2012).
9. Mohamed Ibrahim Abd El Aal, Eun Yoo Yoon, Hyoung Seop Kim, "Recycling of AlSi8Cu3
alloy chips via high pressure torsion" Materials Science and Engineering A 560, pp. 121–
128(2013).
10. MOHAMED IBRAHIM ABD EL AAL, EUN YOO YOON, and HYOUNG SEOP KIM,
"Microstructure Evolution and Mechanical Properties of Al-1080 Processed by a Combination of
Equal Channel Angular Pressing and High Pressure Torsion". The Minerals, Metallurgical and
Materials Transactions A 44, pp. 2581-2590 (2013).
11. Mohamed Ibrahim Abd El Aal , Hyoung Seop Kim,"Wear properties of high pressure torsion
processed ultrafine grained Al– 7%Si alloy" Materials and Design, 53 pp.373–382 (2014).
12. Mohamed Ibrahim Abd El Aal, Ho Yong Um, Kang Hyun Choi and Hyoung Seop Kim "Effect
of Homogenization Treatment on the Microstructure and Mechanical Property Evolutions of As-
Cast Al-Cu Alloy during High-Pressure Torsion" Materials Transactions, Vol. 55, No. 9, pp. 1405
– 1413 (2014).
13. EUN YOO YOON, DONG JUN LEE, LEE JU PARK, SUNGHAK LEE, MOHAMED
IBRAHIM ABD EL AAL, and HYOUNG SEOP KIM "Effect of Post-annealing on Grain
Boundary of Nano-crystalline Cu Processed by Powder High- Pressure Torsion" Metallurgical and
Materials Transactions A 45A, pp. 4748-4752 (2014).
14. Mohamed Ibrahim Abd El Aal, Ho Yong Um, Eun Yoo Yoon, Hyoung Seop Kim,
"Microstructure evolution and mechanical properties of pure aluminum deformed by equal channel
angular pressing and direct extrusion in one step through an integrated die" Materials Science and
Engineering A 625, pp. 252–263 (2015).
15. Mohamed Ibrahim Abd El Aal, M. M. Sadawy, "Influence of the ECAP as a grain refinement
technique on the microstructure evolution, mechanical properties and corrosion behavior of pure
aluminum" Transactions of Nonferrous Metals Society of China 25, pp. 3865−3876 (2015).
16. Mostafa A. Salem Ismail Ghazy El-Batanony Mohamed Ghanem Mohamed Ibrahim Abd El
Aal, "Effect of the Matrix and Reinforcement Sizes on the Microstructure, the Physical and
3
Mechanical Properties of Al-SiC Composites" Journal of Engineering Materials and Technology,
139(1), (2016).
17. Adel Abbas Mohamed Adel Taha Mohamed Abbas Adham Ragab Ehab A. El- Danaf, Mohamed
Ibrahim Abd El Aal "Effect of Equal Channel Angular Pressing on the Surface Roughness of
Solid State Recycled Aluminum Alloy 6061 Chips" Advances in Materials Science and
Engineering (1–3), pp1-11(2017).
18. Ho Yong Um, Byung Ho Parka, Dong-Hyun Ahn, Mohamed Ibrahim Abd El Aal, Jaechan Park,
Hyoung Seop Kim, "Mechanical and biological behavior of ultrafine-grained Ti alloy aneurysm
clip processed using high-pressure torsion" Journal of the Mechanical Behavior of Biomedical
Materials 68, pp. 203-209(2017).
19. Mohamed Ibrahim Abd EL AAL, "3D FEM simulations and experimental validation of plastic
deformation of pure aluminum deformed by ECAP and combination of ECAP and direct
extrusion" Transactions of Nonferrous Metals Society of China 27 pp.1338−1352 (2017).
20. Jing Guo Soo-Hyun Joo Dong-Hai Pi Xiaohui Zhang Xiaorong Zhang Mohamed Abdelaal
Yuepeng Song Hyoung Seop Kim, "Wear Resistance of the La62Cu12Ni12Al14 Bulk Metallic
Glass Under Dry Friction Conditions "Tribol Lett, 65:62(2017).
21. Mohamed Ibrahim Abd El Aal "Effect of high-pressure torsion processing on the microstructure
evolution and mechanical properties of consolidated micro size Cu and Cu-SiC powders"
Advanced Powder Technology, 28, pp. 2135–2150 (2017).
22. Mohamed Ibrahim Abd El Aal, H.S. Kim "Effect of the fabrication method on the wear
properties of copper silicon carbide composites’ Tribology International, 128, pp. 140–154 (2018).
23. Elshafey Ahmed Gadallah, Mohamed Ibrahim Abd El-Aal, Rashad Mohamed Ramadan,Ahmed
Eassa El-Nikhaily "Effect of Parallel Tubular Channel Angular Pressing (PTCAP) Passes on the
Mechanical Properties of Copper Tube" American Journal of Science and Technology, 5(2),PP 35-
41(2018).
24. Min Ji Jang, Hyunjeong Kwak, Ye Won Lee, Youjin Jeong, Jahong Choi, Yong Hee Jo, Won‑Mi
Choi, Hyun Je Sung, Eun Yoo Yoon, S. Praveen, Sunghak Lee, Byeong‑Joo Lee, Mohamed
Ibrahim Abd El Aal, Hyoung Seop Kim "Plastic Deformation Behavior of 40Fe-25Ni-15Cr-
10Co-10V High- Entropy Alloy for Cryogenic Applications" Metals and Materials International,
25, pp.277–284(2019).
25. Mohamed Ibrahim Abd El Aal, Mohamed Adel Taha, AI Selmy, AMEl-Gohry, HS Kim, "Solid
state recycling of aluminium AA6061 alloy chips by hot extrusion" Materials Research Express, 6,
pp. 036525. (2019).
26. Mohamed Ibrahim Abd El Aal, "Wear properties of copper and copper composites powders
consolidated by high-pressure torsion" Friction, 8(2), pp.433–450. (2020).
27. Mohamed Ibrahim Abd El Aal, "The influence of ECAP and HPT processing on the
microstructure evolution, mechanical properties and tribology characteristics of an Al6061 alloy"
Journal of Materials Research and Technology 9 (6), pp.12525–12546 (2020).
Work Presented in Conferences and Published in Local Journals
1. F. Shehata, N. El Mahallawy, M Abd El Hameed and M. Abd El Aal "EDM NAD
CONVENTIONAL MACHINING OF PARTICULATE Al-SiC METALMATRIX COMPOSITE"
4th INTERNATIONAL ENGINEERING CONFERENCE-FACULTY OF ENGINEERING, El
MANSOURA UNIVERSITY, SHARM EL- SHIEKH, April.
2. F. Shehata, N. El Mahallawy, M Abd El Hameed and M. Abd El Aal "EFFECT OF KEROSENE
AND PARAFFIN OIL AS DIELECTRICS ON THEELECTRIC DISCHARGE MACHINING
CHARACTERISTICS OF AL/SIC METAL MATRIX COMPOSITE" Production Engineering &
Design For Development, PEDD7, Cairo, February 7 – 9, pp. 10-19 (2006).20-22, pp. 547-555
(2004).
3. Mohamed Adel Taha Mohamed Abbas Mohamed Ibrahim Abd ElAal "Solid-State Recycling of
Aluminum Alloy (AA-6061) Chips via Hot Extrusion Followed by Equal Channel Angular
Pressing (ECAP) " EIJEST (2016).

To call from inside the university 1200
To call from outside the university 011-588-1200
E-mail pr@psau.edu.sa
To request a service and open a fault report ithelp.psau.edu.sa

Prof.Mohamed Ibrahem Mohamed Abdelaal

Publications

Contact the university leaders

Administration of Public Relations and Media

Social

Faculty Members

Prof.Mohamed Ibrahem Mohamed Abdelaal

Publications

Administration of Public Relations and Media