Faculty Members

Dr.Elawady Atalla Elawady Attia

Ph.D. industrial system engineering (Toulouse University /National Polytechnic Institute of Toulouse (INPT)/ ENSIACET/ IGC/ PSI Associate Professor Department of Mechanical Engineering College of Engineering

Kharj
011-588-8224
e.attia@psau.edu.sa

Curriculum Vitae
Publications

Education

Ph.D. Degree in Industrial system engineering, Toulouse University / National Polytechnic Institute of Toulouse (INPT)/ ENSIACET/ Industrial engineering department,
M.Sc. Degree Benha University Cairo, Egypt June/2006
B.Sc. Degree Benha University Cairo, Egypt, 1998
Associate Professor (July 13, 2019 )

Research Interests

Multi-criteria decision making; mathematical modeling; Lean production; Production planning; Genetic Algorithms; Risk Management, Inventory Management data mining, Performance management

Experience

2014 - 2019 - Mandated as responsible of mechanical technology department - Al-Ameeria Integrated Technical Educational Cluster (ITEC), Educational Development Fund (EDF), Cabinet of Minister, Egypt
2013 - 2019 - Assistant professor - Mechanical engineering department - faculty of engineering (Shoubra), Benha University, Egypt.
2009 - 2013 - PhD scholarship - Toulouse University / INPT/ ENSIACET/ Industrial systems engineering department, LGC-UMR-CNRS 5503/PSI, Toulouse, France
2006 - 2009 - Assistant lecturer - Mechanical and production engineering department - Faculty of engineering (Shoubra), Benha University, Egypt.
1999 - 2006 - Tutor - Mechanical and production engineering department - Faculty of engineering (Shoubra), Benha University, Egypt.
2019 - until now - Associate Professor - Industrial Engineering Department - College of Engineering - Al-Kharj - Prince Sattam bin Abdulaziz University
2019 - 2019 - Associate Professor - Mechanical engineering department - faculty of engineering (Shoubra), Benha University, Egypt.

Responsibilities

Teaching some courses in the Department of Industrial Engineering - College of Engineering Al-Kharj - Prince Sattam bin Abdulaziz University.
Supervising graduation projects - Department of Industrial Engineering - College of Engineering in Al-Kharj - Prince Sattam bin Abdulaziz University.
Conducting analytical and applied research in the field of industrial engineering
Member of some committees of the Faculty of Engineering in Al-Kharj - Prince Sattam bin Abdulaziz University.
Member of the Industrial Engineering Department committees - College of Engineering in Al-Kharj - Prince Sattam bin Abdulaziz University.
Coordinator of the E-leaning Unit - College of Engineering in Al-Kharj - Prince Sattam bin Abdulaziz University.
Coordinator of graduation projects 2020-2023 - Department of Industrial Engineering - College of Engineering in Al-Kharj - Prince Sattam bin Abdulaziz University.
Identify the annual requirements of raw materials for the Mechanical Technology Department at the Integrated Technology Education cluster in Amiriyah. 2014 to 2019.
Participation in the review of scientific researches for international and local journals and conferences.
Participation in the application for the competition organized by the African Union Commission in partnership with (FHI 360) during the period from 1/8/2015 until 10/9/2015. Accordingly, the Amiriya Technological Education cluster was ranked among the top ten technical education institutions in Africa.
Participation in the development of the teacher’s book, in cooperation with the Korean team as a sample for a vocational training center at the Technological Education cluster, in the period from 2015 to 2017.
Organizing and participating in workshops with industry experts and members of the Korean team in order to determine the technical specifications of the courses according to the needs of the labor market. From 2015 to 2017.
Teaching some courses in the field of industrial engineering at the Integrated Technology Education cluster in Amiriyah . In the period from 2014 to 2019.
Follow up the implementation of quality standards according to the British Pearson Authority in the Integrated Technology Education Complex in the Amiriya in the various courses of the department, and prepare for annual visits to the quality references nominated by the Pearson Authority. In the period from 2014 to 2019.
He was assigned to the duties of the Head of the Mechanical Technology Department, at the Integrated Technology Education cluster in Amiriyah, from 2014 to 2019.
Supervising several master’s and PhD theses at the Faculty of Engineering in Shubra and the Faculty of Engineering in Benha.
Supervising several graduation projects at the Technological Education cluster in Amiriyah, from 2014 to 2019.
Supervising several graduation projects at the industrial engineering program, Faculty of Engineering in Shubra. 2013 to 2019.
Part-time assistant professor at the Integrated Technology Education cluster in Amiriyah - under the supervision of the Education Development Fund in the second semester of 2013/2014.
Part-time assistant professor at October University for Modern Sciences and Arts (MSA) to teach maintenance, design, and analysis of industrial systems for 2013-2014.
Preparing course files for the courses he teaches according to the requirements for obtaining quality and accreditation, in the period from 2013 to 2019.
(2014 to 2016): Participation in the activities of achieving quality and accreditation (the teaching and learning standard) The college obtained the accreditation certificate.
Participation in examination and exam monitoring at the Faculty of Engineering in Shubra, from 1999 to 2019.
Participation in several technical committees to equip the workshops and laboratories of the Integrated Technology cluster in Amiriyah, from 2014 to 2019.
He has many scientific papers published in international and local journals and conferences, since 2008.
Elaboration of the technical specifications and the estimated price values for some public tenders.
Participation with the Korean team in developing a feasibility study for a vocational training center in the Technology Education cluster. In the period from 2015 to 2017.
Member of the Egyptian Engineers Syndicate since 1998.
Distribution of teaching loads to faculty members and their assistants for the Mechanical Technology Department at the Integrated Technological Education cluster in Amiriyah, from 2014 to 2019.
Member of the Egyptian Engineers Syndicate since 1998.

Publications

- Attia, E. A., Megahed, A., AlArjani, A., Elbetar, A., & Duquenne, P. (2022). Aggregate production planning considering organizational learning with case based analysis. Ain Shams Engineering Journal, 13(2), 101575.
- Fathi Almbsot, Ahmed El-Assal, El-Awady Attia (2021) “Measuring Performance of Food Supply Chain in Libyan Industrial Organizations: A Balanced Scorecard Approach” presented in the 4th Conference on Engineering Science and Technology-CEST-2021, Zliten-Libya 14th – 16th Dec 2021.
- Attia, E. A., Megahed, A., AlArjani, A., Elbetar, A., & Duquenne, P. (2021). Aggregate production planning considering organizational learning with case based analysis. Ain Shams Engineering Journal. (In Press). https://doi.org/10.1016/j.asej.2021.09.002
- Mostafa Elsayed, A.A. Attia, M.A. Abdelrahman, El-Awady Attia, (2021) Dimensioning of the hydraulic gravity energy storage system using Fuzzy logic based simulation. Journal of Energy Storage 2021;42:103151. https://doi.org/10.1016/j.est.2021.103151 .
- Sameh N. Seleem, El-Awady Attia, Ahmed El-Assal, (2020), “A lean manufacturing road map using Fuzzy-DEMATEL with case-based analysis”, International Journal of Lean Six Sigma, Vol (5), No.(11), PP. 903-928, https://doi.org/10.1108/IJLSS-12-2017-0147
- El-Awady Attia, Khaled Khader and Omayama Nada, (2019) “Mistake proofing cam mechanism through six-sigma process: case study on clothes printing machines”. International Journal of Engineering (ISSN 1728-1431 ), 32(3), 438-444 ,
https://iranjournals.nlai.ir/handle/123456789/336622
- Mohamed H. Essawy, El-Awady Attia, Ahmed M. Elassal (2019) “An integrated model for achieving business strategic objectives with a case study”, International Journal of Six Sigma and Competitive Advantage. 11(4), 253-276. https://doi.org/10.1504/IJSSCA.2019.103557
- Ahmed Karam, El-Awady Attia, (2019), “Integrating collaborative and outsourcing strategies for yard trucks assignment in ports with multiple container terminals”, Accepted for publication in the International Journal of Logistics Systems and Management, Vol. 32, N.3 PP. 372 - 391. (DOI: 10.1504/IJLSM.2019.098324)
- Sameh N. Seleem, El-Awady Attia, Ahmed El-Assal, 2017, “Identification of critical success factors for lean manufacturing using fuzzy DEMATEL method”, Journal of engineering and applied science, Vol 64, No 2, PP. 141-163.
- Sameh N. Seleem, El-Awady Attia, Ahmed El-Assal, 2016, “Managing performance improvement initiatives using DEMATEL method with application case study”, Production Planning & Control, Vol(27), No.(7-8), PP. 637- 649, (Doi:10.1080/09537287.2016.1165301) (http://www.tandfonline.com/doi/full/10.1080/09537287.2016.1165301 )
- Abu-El-Fadl, El-Awady Attia, E.H. Mansour, A.M. Gaafer,T.S. Mahmoud, 2016. “Effect of grain refining, mould material and pouring temperature on the microstructural characteristics of AA6063 aluminum alloy feedstocks produced using low superheat casting”. Materials Science: An Indian Journal. 14(12), pp. 494-502. (http://www.tsijournals.com/toc/article.php?id=10285 )
- E.Y. El-Kady, I.S. El-Mahallawi, T.S.Mahmoud, E.A. Attia, S.S.Mohammed, A.Monir, 2016. “Optimization of the cooling slope casting parameters for producing aa7075 wrought aluminumalloy thixotropic feedstock”. Materials Science: An Indian Journal. 14(8), pp. 297-287.(http://www.tsijournals.com/toc/article.php?id=9582 )
- E.Y.El-Kady, T.S.Mahmoud*, H.M.Zakaria, El-Awady Attia, M.F. El-Sherbiny, 2016. “Optimization of the low superheat casting process parameters for producing of thixotropic a356 alloy feedstock”. Materials Science: An Indian Journal. 14(7), pp. 246-254. ( http://www.tsijournals.com/toc/article.php?id=9552 )
- Adss D.M., Attia E.A., Mansour S.H., Mahmoud T.S., El-Mahallawi I.S., Khalifa T.A. 2016. On the production of al-a356 alloy semi-solid feedstock using cooling slope casting technique. Materials Science: An Indian Journal. 14(6), pp. 208-220. ( http://www.tsijournals.com/toc/article.php?id=9501 )
- Attia, E.-A., Duquenne, P., Le-Lann, J.M. 2014. Considering skills evolutions in multi-skilled workforce allocation with flexible working hours, international journal of Production Research,Vol.52 (15), pp. 4548-4573
(DOI:10.1080/00207543.2013.877613), http://www.tandfonline.com/doi/abs/10.1080/00207543.2013.877613
- Attia, E.-A., Edi, H.K., Duquenne, P., 2012. Flexible resources allocation techniques: characteristics and modelling. International journal of Operational Research 14 (2), 221–254. (DOI: 10.1504/IJOR.2012.046649),
http://www.inderscienceonline.com/doi/abs/10.1504/IJOR.2012.046649
- Seleem S. N., Attia E.-A., El-Assal A., 2018. "Identification of critical success factors for total productive maintenance". In the proceeding of the 18th International Conference on Applied Mechanics & Mechanical Engineering, pp 156-169, April 3-5, 2018, Military Technical Cllege, Cairo, Egypt .
Khader K. M., Nada O. A. and Attia E.-A., 2018. "Design of a Combined Tube Feeding and Cutting Mechanism Using Design for Six Sigma Approach". In the proceeding of the 18th International Conference on Applied Mechanics & Mechanical Engineering, pp 140 -155, April 3-5, 2018, Military Technical College, Cairo, Egypt.
- Zain Alabdeen SUGHAYER, El-Awady Attia, and Ahmed El-Assal, 2017. Spare Parts Classification in Marine Rescue and Fire Services’ Stores with Case Study, In the proceeding of the International Conference on Industrial Design Engineering (ICIDE 2017), Dubai, UAE, December 29-31.
ACM ISBN 9781450348669 http://www.icide.org/2017.html
https://dl.acm.org/citation.cfm?id=3178270
- Mohamed Haidar, El-Awady Attia, and Ahmed El-Assal, 2017. Prioritization of failure modes of fire and rescue vessels with application case study, In the proceeding of the 7th International Conference on Industrial Engineering and Systems Management, pp. 329-334, October 11 – 13, Saarbrücken, Germany.
https://www.htwsaar.de/wiwi/Forschung%20und%20Wissenstransfer/publikationen/dateien/Proceedings_IESM2017.pdf
- Ahmed Karam, El-Awady Attia, and Philippe Duquenne. (2017), “A MILP model for an integrated project scheduling and multi-skilled workforce allocation with flexible working hours”. Presented in 20th IFAC World Congress, (IFAC WC 2017), 9-14 July, Toulouse, France, IFAC PapersOnLine 50-1 (2017) 13964 – 13969.
http://www.sciencedirect.com/science/article/pii/S2405896317328951
- Attia, El-Awady, Ashraf Megahed, and Philippe Duquenne, (2016). Towards a Learning Curve for Electric Motors Production under Organizational Learning via Shop Floor Data. Presented In IFAC Conference on the Manufacturing Modelling, Management & Control. Troyes, France.(doi:10.1016/j.ifacol.2016.07.587) http://www.sciencedirect.com/science/article/pii/S2405896316308473
- Attia E.-A., Megahed A., Baioumy S., Elbetar A., Duquenne P., 2016, "Aggregate Production Planning Considering Performance Evolution: A Case Study". Presented in: 17th International Conference on Applied Mechanics & Mechanical Engineering, April 19-21, 2016, Military Technical College, Cairo, Egypt.
http://www.mtc.edu.eg/publication/pub/Issues/IssuesPaper/20170111_114922.pdf
- Amer M. A.; Attia E.-A., Baioumy S., 2016, "A multi-stage supply chain system controlled by Kanban". Presented in: 17th International Conference on Applied Mechanics & Mechanical Engineering, April 19-21, 2016, Military Technical College, Cairo, Egypt.
http://www.mtc.edu.eg/publication/pub/Issues/IssuesPaper/20170111_115013.pdf
- Adss D.M., Attia E-A. Mahmoud T.S. EL-Mahallawi I.S. Khalifa T.A., 2015, “Effect of Cooling Slope Casting Parameters on the Thixotropic Microstructure of A356 Aluminum Alloy”, Presented in 16th International Conference on Aerospace Science & Aviation Technology (ASAT-16), May 26 - 28, 2015, Cairo, Egypt.
Mahmoud S., Attia E-A, Elassal A., 2015, Managing Performance Improvement Initiatives: Case Study at ElARABY Group in Egypt, presented in Industry Academia Collaboration technology for development, 6th to 8th April 2015, Cairo, Egypt.
- Essawy M., Attia E-A, Elassal A., 2015, QFD model for product progress: A case study at ELARABY manufacturing company, presented in Industry Academia Collaboration technology for development, 6th to 8th April 2015, Cairo, Egypt.
Mahmoud S., Attia E-A, Elassal A., 2014, A frame work for selecting performance improvement initiatives, presented in Al-Azhar Engineering Thirteenth International Conference. December, 23-25, Cairo, Egypt.
- Essawy M., Attia E-A, Elassal A., 2014, Improving product manufacturing process using QFD methodology, presented in Al-Azhar Engineering Thirteenth International Conference. December, 23-25, Cairo, Egypt.
- Attia, E.-A., Dumbrava, V., Duquenne, P., 2012. Factors affecting the development of workforce versatility, In: 14th IFAC Symposium on Information Control Problems in Manufacturing. May 23-25, Bucharest, Romania.
http://www.sciencedirect.com/science/article/pii/S1474667016333183
- Attia, E.-A., Edi, H.K., Duquenne, P., 2012. A greedy heuristic approach for the project scheduling with labour allocation problem. In: Al-Azhar Engineering Twelfth International Conference. December, 25-27, Cairo, Egypt, pp.173-196.
http://oatao.univ-toulouse.fr/8917/1/Attia_8917.pdf
- Attia, E.-A., Duquenne, P., Le-Lann, J.-M., 2012. Decision-based genetic algorithms for solving multi-period project scheduling with dynamically experienced workforce, In: 9th International Conference on Modeling, Optimization & SIMulation, MOSIM-2012, 6-8 June, Bordeaux, France. Pages 10.
http://oatao.univ-toulouse.fr/8916/
- ATTIA, E. A., Soliman, M.M., Gomaa, A. H., Zahran, M. Z., 2008. Solving assembly line balancing problem using genetic algorithms, 43rd Annual Conference on Statistics, Computer Science, and Operations Research, In the Occasion of the 1st Centennial for Cairo University (1908-2008), December, 22-25, 2008, Cairo, Egypt.
- Attia, E.-A., Duquenne, P., Le-Lann, J.-M., 2013. Évaluation de la complexité des projets basée sur une analyse en composantes principales, In 10e congres international de génie industriel, CIGI-2013, La Rochelle 12-14 juin 2013, France.
Attia, E.-A., Duquenne, P., Le-Lann, J.-M., 2011. Affectation flexible des effectifs : Vers un modèle de gestion des compétences. In: XIIIéme Congrès de la Société Française de Génie des Procédés, (SFGP-2011), 29/Novembre au 1/décembre 2011, Lille, France.
http://oatao.univ-toulouse.fr/8912/
- Attia, E.-A., Duquenne, P., Le-Lann, J.-M., 2011. Prise en compte des évolutions de compétences pour les ressources humaines. In : 9eme congres international de génie industriel, CIGI-2011,12-14 October 2011, Saint-Sauveur, Québec, Canada.
http://www.simagi.polymtl.ca/cigi2011/articles/_Attia-Prise.pdf
- Attia, E.-A., Duquenne, P., Le-Lann, J.-M., 2011. Problème d’affectation flexible des ressources humaines : Un modèle dynamique. 12ème congrès annuel de la Société Française de Recherche Opérationnelle et d’Aide à la Décision (ROADEF 2011), Saint-Etienne, France.
http://oatao.univ-toulouse.fr/8910/

Dr.Elawady Atalla Elawady Attia

Education

Research Interests

Experience

Responsibilities

Publications

Contact the university leaders

Administration of Public Relations and Media

Social

Faculty Members

Dr.Elawady Atalla Elawady Attia

Education

Research Interests

Experience

Responsibilities

Publications

Administration of Public Relations and Media