Faculty Members

Dr.Ali Mostafa Abdelaty Hassibelnaby

Fellow of the Institute of Sheet Metal Engineering (FISME), and Member of the American Society of Mechanical Engineers (MASME) Associate Professor Department of Mechanical Engineering College of Engineering

Kharj
011-588-0308
a.hassibelnaby@psau.edu.sa

Curriculum Vitae
Publications

Education

PhD in Materials Science and Engineering, Institute of Metal Research (IMR), Chinese Academy of Sciences (CAS), University of Chinese Academy of Sciences, P. R. China, June 2019
Computational Mechanics Diploma, Mechanical Engineering Department, Pohang University of Sciences and Technology (POSTECH), Pohang, South Korea, Sept. 2014
M.Sc. in Mechanical Engineering, Faculty of Engineering, Helwan University, Cairo, Egypt, June 2013
B.Sc. in Mechanical Engineering, Faculty of Engineering, Helwan University, Cairo, Egypt, May 2007.

Research Interests

Metal Forming Technologies
High Speed Deformation
Near Net shape Manufacturing
Microstructure-based Modelling
Microstructure Evolution and Analysis
Process Simulation and modelling using Commercial FE Codes
Modelling Deformation and Fracture Behaviors of Sheet Metals
Computational Modeling of Thermo-mechanical Processes
Mechanics of materials, solid mechanics, computational materials science
Plasticity theory, constitutive modeling and finite element simulations for structural materials
Reverse engineering and its application to material properties identification
Computational modelling of thermo-mechanical processes
Integrated multi-scale modelling based on microstructure evolution and crystal plasticity finite element method
Damage and fatigue with microstructure evolution
Data-driven computational plasticity including machine learning

Experience

11/2022 - until now - Assistant professor - Mechanical Engineering Program, College of Engineering-Al-Kharj, Prince Sattam bin Abdulaziz University, KSA
3/2022 - 11/2022 - Brain Pool Research Fellow - Materials Mechanics Laboratory (MAMEL), Department of Materials Science and Engineering, Seoul National University, Seoul, South Korea
1/2020 - 3/2022 - Assistant Professor - Mechanical Engineering Department, Faculty of Engineering, Helwan University, Cairo, Egypt
6/2019 - 11/2022 - Visiting Professor - Institute of Advanced Materials and Forming Technology, College of Material Science and Technology, Nanjing University of Aeronautics and Astronautics (NUAA), Nanjing, China
9/2014 - 6/2019 - Research Assistant and PhD. Student - Advanced Metal Forming Technology Group, Institute of Metal Research (IMR), Chinese Academy of Sciences (CAS), University of Chinese Academy of Sciences
8/2013 - 9/2014 - Visiting Scholar - Advanced Materials and Mechanics lab (AMML), Mechanical Engineering Department, Pohang University of Sciences and Technology (POSTECH), Pohang, South Korea
6/2009 - 8/2013 - Lecturer Assistant - Mechanical Engineering Department, Faculty of Engineering, Helwan University, Cairo, Egypt
4/2008 - 6/2009 - Manufacturing Engineer - Workshop # 11, Egyptian army forces, Cairo, Egypt
8/2007 - 4/2008 - Manufacturing Engineer - ASEC ARESCO for Manufacturing and Industrial Projects, (Sinai Gray Cement Project, Line2, EGYPT

Responsibilities

Editorial Board - Journal of Mechanical Materials and Mechanics Research, May 2022 to date, Editorial Board - International Journal of Mineral Processing and Extractive Metallurgy, April 2022 to date, Technical Assessor and Accreditation Specialist; (January 2021 to date); Egyptian Accreditation Council (EGAC), Cairo, Egypt, Peer Reviewer at Journal of Materials Science & Technology (JMST), Peer Reviewer at Journal of Advanced Research (JAR), Peer Reviewer at Materials Characterization (MC), Peer Reviewer at Metals and Materials International (MAMI), Peer Reviewer at Journal of Central South University (JCSU),

Publications

[72] Ali Abd El-Aty*, Sangyul Ha, Yong Hou, Yong Xu, Shi-Hong Zhang, Xia Liang-Liang, Mohamed M.Z. Ahmed, Characterization and constitutive analysis-based crystal plasticity of warm flow and fracture behaviours of 2060 Al–Cu–Li alloy, Journal of Materials Research and Technology. doi.org/10.1016/j.jmrt.2023.07.236.
[71] Chunmei Liu, Ali Abd El-Aty*, Myoung-Gyu Lee, Yong Hou, Yong Xu, Shenghan Hu, Cheng Cheng, Jie Tao, Xunzhong Guo, Predicting the forming limits in the tube hydroforming process by coupling the cyclic plasticity model with ductile fracture criteria, Journal of Materials Research and Technology. doi.org/10.1016/j.jmrt.2023.07.177.
[70] Abd El-Aty, A*.; Ha, S.; Xu, Y.; Hou, Y.; Zhang, S.-H.; Alzahrani, B.; Ali, A.; Ahmed, M.M.Z. Coupling Computational Homogenization with Crystal Plasticity Modelling for Predicting the Warm Deformation Behaviour of AA2060-T8 Al-Li Alloy. Material, doi.org/10.3390/ma16114069
[69] Yong Hou, Junying Min, Ali Abd El-Aty, Heung Nam Han, Myoung-Gyu Lee, A new anisotropic-asymmetric yield criterion covering wider stress states in sheet metal forming, International Journal of Plasticity. doi.org/10.1016/j.ijplas.2023.103653.
[68] Shuo Zheng, Chunmei Liu, Ali Abd El-Aty, Shenghan Hu, Xueshan Bai, Jin Sun, Xunzhong Guo, Jie Tao, Design and implementation of a 6-DOF robot flexible bending system, Robotics and Computer-Integrated Manufacturing, doi.org/10.1016/j.rcim.2023.102606.
[67] Chao Pan, Cheng Cheng, Ali Abd El-Aty, Jiahao Wang, Jie Tao, Chunmei Liu, Xunzhong Guo, Shenghan Hu, Predicting the wrinkling in AA5052 seamless tubes manufactured by free bending forming technology, Journal of Manufacturing Processes. doi.org/10.1016/j.jmapro.2023.06.043.
[66] Shenghan HU, Cheng CHENG, Ali Abd EL-ATY, Shuo ZHENG, Xunzhong GUO, Chunmei LIU, Jie TAO, Influence of deformation zone length on bending radius of SS304 tubes with small diameters manufactured via free bending-based active motion, Chinese Journal of Aeronautics. doi.org/10.1016/j.cja.2022.10.001.
[65] Mohamed M. Z. Ahmed, Ahmed R. S. Essa, Sabbah Ataya, Mohamed M. El-Sayed Seleman, Ali Abd El-Aty, Bandar Alzahrani, Kamel Touileb, Ashraf Bakkar, Abdelkarim Y. A. Mohamed, Friction Stir Welding of AA5754-H24: Impact of Tool Pin Eccentricity and Welding Speed on Grain Structure, Crystallographic Texture, and Mechanical Properties, 2023, materials. doi.org/10.3390/ma16052031.
[64] Mohamed M. Z. Ahmed, Mohamed M. El-Sayed Seleman, Asmaa M El-Sayed Sobih, Ashraf Bakkar, Ibrahim Albaijan, Kamel Touileb, Ali Abd El-Aty, Friction Stir-Spot Welding of AA5052-H32 Alloy Sheets: Effects of Dwell Time on Mechanical Properties and Microstructural Evolution, 2023, materials. doi.org/10.3390/ma16072818.
[63] Mohamed M. Z. Ahmed, Mohamed M. El-Sayed Seleman, Ibrahim Albaijan, Ali Abd El-Aty, Microstructure, Texture, and Mechanical Properties of Friction Stir Spot-Welded AA5052-H32: Influence of Tool Rotation Rate, 2023, materials. doi.org/10.3390/ma16072818.
[62] Yong Hou, Dongjoon Myung, Jong Kyu Park, Junying Min, Hyung-Rim Lee, Ali Abd El-Aty*, and Myoung-Gyu Lee, A review on characterisation and modelling approaches for sheet metal forming of lightweight metallic materials, 2023, Materials. doi.org/10.3390/ma16020836
[61] Ali Abd El-Aty*, Xunzhong Guo, Myoung-Gyu Lee, Jie Tao, Yong Hou, Shenghan Hu, Tao Li, Cong Wu, Qiucheng Yang, A review on Flexibility of Free Bending Forming Technology for Manufacturing Thin-Walled Complex-Shaped Metallic Tubes, 2022, International Journal of Lightweight Materials and Manufacture. doi.org/10.1016/j.ijlmm.2022.09.007.
[60] Hao Zhang, Ali Abd El-Aty, Jie Tao, Xunzhong Guo, Shuo Zheng, Cheng Cheng*, Effect of Active Deflection on the Forming of Tubes Manufactured by 3D Free Bending Technology,2022, Metals, 12(10):1621. doi.org/10.3390/met12101621.
[59] Ali Abd EL-Aty, Zushu Huang, Zhenbiao Sun, Chunmei Liu, Wenfeng Guo, Yangyang Deng, and Xunzhong Guo, 2022, Flexible multi-point plate metal forming technology, Flexible Metal Forming Technologies： Principles, Process, and Equipment, Springer Tracts in Mechanical Engineering, Springer Singapore, Series ISSN (2195-9862), Series E-ISSN (2195-9870).
[58] Hui Wang, Shuo Zheng, Haoran Luo, Gui Wei, Xunzhong Guo, Ali Abd El-Aty, Yanbo Gu, and Kaihui Guang, 2022, Flexible Incremental sheet metal forming technology, Flexible Metal Forming Technologies： Principles, Process, and Equipment, Springer Tracts in Mechanical Engineering, Springer Singapore, Series ISSN (2195-9862), Series E-ISSN (2195-9870).
[57] Xunzhong Guo, Cheng Cheng, Hao Zhang, Chunmei Liu, Yong Sun, Albert Sedlmaier, Jie Tao, Yizhou Shen, Hui Wang, Huaguan Li, and Ali Abd El-Aty, 2022, Introduction and state of the art of flexible forming technologies, Flexible Metal Forming Technologies： Principles, Process, and Equipment, Springer Tracts in Mechanical Engineering, Springer Singapore, Series ISSN (2195-9862), Series E-ISSN (2195-9870).
[56] Cheng Cheng, Qiucheng Yang, Xunzhong Guo, Xueshan Bai, Shenghan Hu, Hao Chen, Cong Wu, Tao Li, Hao Xiong, and Ali Abd El-Aty, 2022, Tube 3D free bending forming technology, Flexible Metal Forming Technologies： Principles, Process, and Equipment, Springer Tracts in Mechanical Engineering, Springer Singapore, Series ISSN (2195-9862), Series E-ISSN (2195-9870).
[55] Jie Tao, Shenghan Hu, Xunzhong Guo, Gui Wei, Cheng Wang, Wenjiao Pei, and Ali Abd El-Aty, 2022, Flexible tube die-less forming, Flexible Metal Forming Technologies： Principles, Process, and Equipment, Springer Tracts in Mechanical Engineering, Springer Singapore, Series ISSN (2195-9862), Series E-ISSN (2195-9870).
[54] Yong Hou, Kai Du, Ali Abd El-Aty, Myoung-Gyu Lee, Junying Min, Anisotropic behavior of sheet metals under plane strain loading: A novel non-associated plasticity model based on fourth-order polynomial function, 2022, Materials and Design. doi.org/10.1016/j.matdes.2022.111187.
[53] Shenghan Hu, Cheng Cheng, Ali Abd El-Aty, Shuo Zheng, Xunzhong Guo, Chunmei Liu, Jie Tao, Investigate the impact of deformation zone length on the free bending radius of small diameter SS304 tubes, Chinese Journal of Aeronautics. doi.org/10.1016/j.cja.2022.10.001.
[52] Zhenbiao Sun, Chunmei Liu, Xunzhong Guo*, Zushu Huang, Shuo Zheng, Cheng Cheng, Jie Tao, Ali Abd El-Aty, Forming Characteristics of a Novel Robot-based Tube Bending Process, International Journal of Advanced Manufacturing Technology,
[51] Ali Abd El-Aty*, Yong Xu, Shi-Hong Zhang, Ma Yan, Xunzhong Guo, Jie Tao, Yong Hou, Myoung-Gyu Lee*, Dynamic Deformation Behaviour of Al-Li Alloys under High Strain Rate Deformation, 2022, NUMISHEET 2022. The Minerals, Metals & Materials Series. Springer, Cham, doi.org/10.1007/978-3-031-06212-4_67
[50] A. Abd El-Aty*, Y. Xu, S. H. Zhang, X. Guo, J Tao, M G Lee*, Phenomenological-based constitutive modelling of warm deformation behavior of high-Strength lightweight AL-Li alloy sheets, 2022, IOP Conference Series: Materials Science and Engineering, doi:10.1088/1757-899X/1238/1/012017
[49] Sobh, A.S., Hussien, H.M.A., Abd El-Aty, A*. Designing and Developing of a Renewable Agrobot to Enhance Harvest Productivity and Reduce Water Consumption. 2022, Recent Advances in Manufacturing Processes and Systems. Lecture Notes in Mechanical Engineering. Springer, Singapore. doi.org/10.1007/978-981-16-7787-8_32.
[48] Ali Abd El-Aty*, Shi-Hong Zhang, Xunzhong Guo, Yong Xu, Ma Yan, Dayoung Chen, Jie Tao, The High-Speed Deformation Behavior of High-Strength Lightweight Al-Li Alloy Sheets. 2021, Forming the Future. The Minerals, Metals & Materials Series. Springer, Cham, doi.org/10.1007/978-3-030-75381-8_102.
[47] Zhaoru HE, Yizhou SHEN, Jie TAO, Haifeng CHEN, Xiaofei ZENG, Xin HUANG, Ali Abd El-Aty*, Laser shock peening regulating aluminium alloy surface residual stresses for enhancing the mechanical properties: Roles of shock number and energy, 2021, Surface and Coatings Technology, doi.org/10.1016/j.surfcoat.2021.127481.
[46] Wei Wang, Ali Abd El-Aty, Xueshan Bai, Jin Sun, Myoung-Gyu Lee, Wenbin Wei, Chen Hao, Xunzhong Guo, Jie Tao, Theoretical analysis, finite element modelling, and experimental investigation of manufacturing convoluted spiral tubes through free bending forming technology, 2021, International Journal of Advanced Manufacturing Technology, doi.org/10.1007/s00170-021-07450-3.
[45] Shenghan Hu, Ali Abd El-Aty, Cheng Cheng, Qiucheng Yang, Yao Qin, Tao Li, Cong Wu, Xunzhong Guo, Jie Tao, Yong Xu, The influence of the MRE forming medium and axial feeding on the forming quality of thin-walled Inconel 718 bellow manufactured by a bulging process: finite element simulation and experimentation, 2021, International Journal of Advanced Manufacturing Technology, doi.org/10.1007/s00170-020-06386-4.
[44] Liangliang Xia, Shi-Hong Zhang, Yong Xu, Shuaifeng Chen, Ali Abd El-Aty, Artur I. Pokrovsky, Alina A. Bakinovskaya: Study of the ductility enhancement of 5A90 Al-Mg–Li alloy sheets with stress relaxation, 2021, Philosophical Magazine, doi.org/10.1080/14786435.2021.1971316.
[43] Xuan Cheng, Yixi Zhao, Ali Abd El-Aty, Xunzhong Guo, Shuman Yu, Deformation behavior of convolute thin-walled AA6061-T6 rectangular tubes manufactured by the free bending forming technology, 2021, International Journal of Advanced Manufacturing Technology, doi.org/10.1007/s00170-021-08141-9.
[42] Hantao Kou, Liang Qin, Ali Abd El-Aty, Yu Liu, Xuwei Zhu, Jie Tao, Effect of temperature on the deep-drawing forming performance of Ti/Al laminates: Experimental investigation and finite element analysis, 2021, International Journal of Advanced Manufacturing Technology, doi.org/10.1007/s00170-021-06892-z.
[41] Wei Wang, Shenghan Hu, Ali Abd El-Aty, Cong Wu, Qiucheng Yang, Hao Chen, Yizhou Shen, Jie Tao, Springback analysis of different A-values Cu and Al tubes in free bending forming technology: Experimentation and Finite element modelling, 2021, International Journal of Advanced Manufacturing Technology, doi.org/10.1007/s00170-020-06465-6.
[40] Ali Abd El-Aty*, W Wei, X Guo*, H Wang, J Tao, H Chen, Y Qin, Deformation characteristics in 3D free-bending forming of complex spiral tubes, 2020, IOP Conference Series: Materials Science and Engineering, doi:10.1088/1757-899X/967/1/012055.
[39] Tao Li, Hui Wang, Ali Abd El-Aty, Jiang Li, Yong Zhang, Wenbin Wei, Hao Chen, Xuan Cheng, Jie Tao, Xunzhong Guo, Theoretical modelling and finite element simulation of AA6061 involute components based on 3D free bending process, 2020, International Journal of Mechanical Sciences, doi.org/10.1016/j.ijmecsci.2020.105607.
[38] Xuan Cheng, Hui Wang, Ali Abd El-Aty, Jie Tao, Wenbin Wei, Yao Qin, Xunzhong Guo, Cross-section deformation behaviors of a thin-walled rectangular tube of continuous varying radii in the free bending technology, 2020, Thin-Walled Structures, 150: 106670. doi.org/10.1016/j.tws.2020.106670.
[37] Qiucheng Yang, Cheng Cheng, Ali Abd El-Aty, Shenghan Hu, Yao Qin, Tao Li, Cong Wu, Yong Xu, Xunzhong Guo, Effects of punch size, magnetic field, and Magnetorheological Elastomers medium on forming T-shaped thin-walled Inconel 718 tubes, 2020, Chinese Journal of Aeronautics, doi.org/10.1016/j.cja.2020.09.032.
[36] Hao Chen, Hui Wang, Ali Abd El-Aty, Yao Qin, Jiang Li, Yong Zhang, Tao Li, Xunzhong Guo, Impact of bending dies with different friction forms on the axial thrust and forming quality of the tubes manufactured by free bending technology, 2020, Chinese Journal of Aeronautics, doi.org/10.1016/j.cja.2020.08.029.
[35] Tao Li, Ali Abd El-Aty, Cheng Cheng, Cong Wu, Qiucheng Yang, Shenghan Hu, Yong Xu, Yizhou Shen, Jie Tao, Xunzhong Guo, Investigate the effect of the magnetic field on the mechanical properties of silicone rubber-based anisotropic magnetorheological elastomer during curing process, 2020, Journal of Renewable Materials, doi:10.32604/jrm.2020.012939.
[34] Cong Wu, Cheng Cheng, Ali Abd El-Aty, Tao Li, Yao Qin, Qiucheng Yang, Shenghan Hu, Yong Xu, Xunzhong Guo, Influence of particles size and concentration of carbonyl iron powder on magnetorheological properties of silicone rubber-based magnetorheological elastomer, 2020, Materials Research Express, doi.org/10.1088/2053-1591/abaf8a.
[33] Xunzhong Guo, Yaohui Yu, Jie Tao, Hui Wang, Ali Abd El-Aty, Cheng Wang, Xinyi Luo, Naksoo Kim, Maximum residual contact stress in spinning process of SS304/20 bimetallic pipe, 2020, International Journal of Advanced Manufacturing Technology, doi.org/10.1007/s00170-019-04774-z.
[32] Dayong Chen, Yong Xu, Shihong Zhang, Yan Ma, Ali Abd El-Aty, Dorel Banabic, Arturu I Pokrovsky, Alina A. Bakinovskaya, A novel method to evaluate high strain rate formability of sheet metals under impact hydroforming, 2020, Journal of Materials Processing and Technology, doi.org/10.1016/j.jmatprotec.2019.116553.
[31] Song-Wei Wang; Yan Chen; Hongwu Song, Ali Abd El-Aty; Jin-Song Liu; Shi-Hong Zhang, Investigation of texture transformation paths in copper tube during floating plug drawing process, 2020, International Journal of Material Forming, /doi.org/10.1007/s12289-020-01538-z.
[30] Ali Abd El-Aty, Yong Xu, Shi-Hong Zhang, Sangyul Ha, Yan Ma, Dayong Chen, Impact of high strain rate deformation on the mechanical behavior, fracture mechanisms and anisotropic response of 2060 Al-Cu-Li alloy, 2019, Journal of Advanced Research, doi.org/10.1016/j.jare.2019.01.012.
[29] Ali Abd El-Aty*, Yong Xu*, Shi-Hong Zhang, Yan Ma, Dayong Chen, Effect of novel impact hydroforming technology on the formability of Al alloys, 2019, IOP Conf. Series.: Mater. Sci. Eng, doi:10.1088/1757-899X/651/1/012053.
[28] Liangliang Xia, Yong Xu, Ali Abd El-Aty, Shi-Hong Zhang, Karl Brian Nielsen, Jingming Li, Deformation characteristics in hydroforging of thin-walled and large expansion hollow component through the radial direction: Experimentation and Finite Element Modelling, 2019, International Journal of Advanced Manufacturing Technology, doi.org/10.1007/s00170-019-04346-1.
[27] Xuan Cheng, Xunzhong Guo, Jie Tao, Yong Xu; Ali Abd El-Aty; Hai Liu, Investigation of the Effect of Relative Thickness (t0/d0) on the Formability of the AA6061 Tubes during Free Bending Process, 2019, International Journal of Mechanical Sciences, doi.org/10.1016/j.ijmecsci.2019.06.006.
[26] Xunzhong Guo, Xuan Cheng, Yong Xu, Jie Tao, Ali Abd El-Aty, Hai Liu, Finite element modelling and experimental investigation of the impact of filling different materials in copper tubes during 3D free bending process, 2019, Chinese Journal of Aeronautics, doi.org/10.1016/j.cja.2019.02.016.
[25] Ali Abd El-Aty, Shi-Hong Zhang, Yong Xu, Sangyul Ha, Deformation behavior and anisotropic response of 2060 Al-Cu-Li alloy: Experimental investigation and computational homogenization-based crystal plasticity modelling, 2018, Journal of Material Research and Technology, doi.org/10.1016/j.jmrt.2018.08.010.
[24] Ali Abd El-Aty, Sangyul Ha, Yong Xu, Shi-Hong Zhang, Computational homogenization of tensile deformation behavior of a third generation Al-Li alloy 2060-T8 using Crystal Plasticity finite element modelling Method, 2018, Materials Sciences and Engineering A, doi.org/10.1016/j.msea.2018.06.088.
[23] Ali Abd El-Aty, Sangyul Ha, Shihong Zhang, Yong Xu, Prediction of tensile deformation behavior of a novel 2060-T8 Al-Li alloy based on Crystal Plasticity Homogenization Method, 2018, Journal of Physics: Conf. Series, doi: 10.1088/1742-6596/1063/1/012058.
[22] Xunzhong Guo, Cheng Wang, Yong Xu, Ali Abd El-Aty, Shi-Hong Zhang, Incremental forming characteristics of hollow parts with grooves, 2018, International Journal of Advanced Manufacturing Technology, doi.org/10.1007/s00170-018-3201-5.
[21] Xunzhong Guo, Hao Xiong, Yong Xu, Ali Abd El-Aty, Yannan Ma, Yonghao Zhao, Shihong Zhang, U-R relationship prediction method for aluminium alloy circular tube free-bending process based on sensitivity analysis of material parameters, 2018, International Journal of Advanced Manufacturing Technology, doi.org/10.1007/s00170-018-2614-5.
[20] Xunzhong Guo, Wenbin Wei, Yong Xu, Ali Abd El-Aty, Hai Liu, Hui Wang, Xinyi Luo, Jie Tao, Wall thickness distribution of Cu-Al bimetallic tube based on free bending process, 2018, International Journal of Mechanical Sciences, doi.org/10.1016/j.ijmecsci.2018.10.013.
[19] Shi-Hong Zhang, Yan Ma, Yong Xu, Ali Abd El-Aty, Dayong Chen, Guoqing Chen, Experimental investigation of novel impact hydroforming technology on sheet metal formability, 2018, IOP Conf. Series: Journal of Physics: Conf. Series, doi:10.1088/1742-6596/1063/1/012173
[18] Shi-Hong Zhang, Yan Ma, Yong Xu, Ali Abd El-Aty, Dayong Chen, Effect of Impact Hydroforming Loads on the Formability of AA5A06 Sheet Metal, 2018, IOP Conf. Series: Materials Science and Engineering; doi:10.1088/1757-899X/418/1/012114.
[17] Dayong Chen; Yong Xu; Shihong Zhang; Zhangjian Zhao; Ali Abd El-Aty; Yan Ma; Jingming Li, A feasible study on hybrid sheet hydroforming process to produce a novel high-capacity engine oil pan: finite element modelling and experimental validation, 2018, International Journal of Advanced Manufacturing Technology, doi.org/10.1007/s00170-018-2124-5.
[16] Xunzhong Guo, Hao Xiong, Ziqi Ma, Yong Xu, Ali Abd El-Aty, Yannan Ma, Kai Jin, Free-bending forming mechanism and characteristics with small bending radius under a spherical connection between bending die and guider, 2018, International Journal of machine tools and manufacture, doi.org/10.1016/j.ijmachtools.2018.05.005.
[15] Yan Ma, Shihong Zhang, Dorel Banabic, Yong Xu, Ali Abd El-Aty, Dayong Chen, Ming Chen, Hong-Wu Song, Arturu I Pokrovsky, Guoqing Chen, Investigation on Formability Enhancement of 5A06 Aluminum Sheet by Impact Hydroforming, 2018, CIRP Annals-Manufacturing Technology, doi.org/10.1016/j.cirp.2018.04.024.
[14] Xunzhong Guo, Hao Xiong, Yong Xu, Yannan Ma, Ali Abd El-Aty, Jie Tao, Kai Jin, Free-bending process characteristics and forming process design of copper tubular components, 2018, International Journal of Advanced Manufacturing Technology, doi.org/10.1007/s00170-018-1788-1.
[13] Sabry S. Youssef, Ali Abd El-Aty, Mohamed Adel Taha, Masoud Ibrahim Mohamed, Influence of Boron Addition and Heat Treatment on the Mechanical Properties of 7050 Al Alloy, 2018, International Journal of Scientific & Engineering Research, 9(5): 1119-1127.
[12] Ali Abd El-Aty, Yong Xu, Shi-Hong Zhang, Xunzhong Guo, Yan Ma, Dayong Chen, Strengthening mechanisms, deformation behavior and anisotropic mechanical properties of Al-Li alloys: A review, 2017, Journal of Advanced Research, doi.org/10.1016/j.jare.2017.12.004.
[11] Ali Abd El-Aty, Yong Xu, Shihong Zhang, Yan Ma, Dayong Chen, Experimental investigation of tensile properties and anisotropy of 1420, 8090 and 2060 Al-Li alloys sheet undergoing different strain rates and fibre orientation: A comparative study., 2017, Procedia Engineering, doi.org/10.1016/j.proeng.2017.10.730.
[10] Xunzhong Guo, Yannan Ma, Wenliang Chen, Hao Xiong, Yong Xu, Ali Abd El-Aty, Kai Jin, Simulation and experimental research of the free bending process of a spatial tube, 2017, Journal of Materials Processing and Technology, doi.org/10.1016/j.jmatprotec.2017.11.062.
[9] Yan Ma, Yong Xu, Shihong Zhang, Dayong Chen, Ali Abd El-Aty, Jingming Li, Zhangjian Zhao, Guoqing Chen; The effect of tube bending, heat treatment and loading paths on process responses of hydroforming for automobile intercooler pipe: numerical and experimental investigations, 2017, International Journal of Advanced Manufacturing Technology, 91: 2369-2381 dOI 10.1007/s00170-016-9920-6.
[8] Ali Abd El-Aty*, Tauseef Ahmed, Ahmed Farooq, Reversible and Irreversible Wrinkling in Tube Hydroforming Process, 2017; AIP Conference Proceedings, doi: 10.1063/1.4989939.
[7] Ahmed Farooq, Ali Abd El-Aty*, Tauseef Ahmed, An Investigation on Directionally Dependant Fracture Toughness Behavior of Monolithic Nickel Gradient Material Synthesized from Electroplating, 2017; AIP Conference Proceedings, doi: 10.1063/1.4989939.
[6] D.Y. Chen, Y. Xu, S.H. Zhang, A. Abd El-Aty, Y. Ma, Numerical and experimental study on manufacture of a novel high-capacity engine oil pan subjected to hydro-mechanical deep drawing, 2017; Journal of Physics: Conf. Series, doi: 10.1088/1742-6596/896/1/012012.
[5] Mohamed Mohamed, Ali Abd El-Aty, Abdel Aziz Hegazy, Nader Farahat, Theoretical investigations and simulation of the hydroforming processes performed on c1010 low carbon steel tubes, 2015, Applied Mechanics and Materials, doi:10.4028/www.scientific.net/AMM.799-800.443.
[4] Ahmad Farooq, Ali Abd El-Aty*, Novel method of developing nano silica-coated alumina micro abrasives using Silicon nanoparticles generated from spark erosion as the source, 2015, Applied Mechanics and Materials, doi:10.4028/www.scientific.net/AMM.799-800.479.
[3] Ahmad Farooq, Ali Abd El-Aty*, Centre of Panel Thermal Conductivity Performance Analysis of Aerocor-centrifugal Hybrid Ultrafine Glass Fiber VIP Core Materials, 2015, Advanced Materials Research, doi:10.4028/www.scientific.net/AMR.1120-1121.1511.
[2] Ali Abd El-Aty *, Ahmad FAROOQ, Azza Barakat, Mohamed Etman, Application of lean manufacturing to improve the electronics industry in Egypt: case study, 2015, ELK Asia Pacific Journals – Special Issue; doi.org/10.16962/elkapj/si.arimpie-2015.63.
[1] Ali Abd El-Aty*, Ahmad FAROOQ, Azza Barakat, Mohamed Etman, Implementation of lean manufacturing principles in the process industry: a case study, 2015, Applied Mechanics and Materials, 799-800, doi:10.4028/www.scientific.net/AMM.799-800.1431.

Dr.Ali Mostafa Abdelaty Hassibelnaby

Education

Research Interests

Experience

Responsibilities

Publications

Contact the university leaders

Administration of Public Relations and Media

Social

Faculty Members

Dr.Ali Mostafa Abdelaty Hassibelnaby

Education

Research Interests

Experience

Responsibilities

Publications

Administration of Public Relations and Media