profile photo
Brahim Mohamed Mrabet , Ph.D. 

Managerial Roles

- Vice Dean of Quality and development Affairs from 2011 to 2018

- Vice Dean of Academic Affairs 2010-2011

Education

EDUCATION

2000 – 2005

PHD in Electrical Engineering

University of Paul Sabatier – Toulouse - France

Research thesis: Influence of the power supply pseudo continuous, sinusoidal and pulsed on the radiation of a low pressure mercury lamp

1999

Aggregation Certificate in Electrical Engineering

Ranked first in the national exam organized by the High Ministry of Education for the obtention of this certificate

Higher School of Sciences and Technology of Tunis

1996 - 1998

Certificate of Specialized Higher Studies in Electrical Engineering

Higher School of Sciences and Technology of Tunis

1992 - 1995

Master’s degree in Electrical Engineering

Higher School of Sciences and Technology of Tunis

Subject : Modeling and study of the electronic ballast coupled to the low pressure discharge lamp

1985 - 1990

Engineer’s degree in Electrical Engineering

1984 – 1985

Baccalaureate 

Experiences

September 2010 up to now:

Assistant Professor, College of Engineering at AlKharj, Salman Bin Abdul-Aziz University.

And Vice Dean of Quality and Development Affairs

2007-2010

Assistant Professor, College of Engineering at AlKharj, King Saud University

2002-2007:

Researcher and Assistant Professor at the Higher Institute of Technology – Tunis (ISTMT)

1998 – 2002:

Teaching assistant at the Higher Institute of Technological Studies–Tunis (ISET)

1994 – 1996:

Researcher at High School of Technical Sciences of Tunis.

Research

Publications 2014-2018

Conferences:

[C1] Brahim Mrabet, Abdeljelil Chammam, Walid Nsibi  Experimental Study of electrical and Harmonics characteristics of LED bulbs and comparison with  Different other lamp-Ballast  Systems International Multi-Conference on Systems, Signals and Devices  SSD’2018, 19-22 March 2018 Yasmine Hammamet, Tunisia

[C2] Abdeljelil Chammam, Brahim Mrabet, “Experimental Quantification of Current Harmonics Injected by Compact Fluorescent Lamps” International Multi-Conference on Systems, Signals and Devices  SSD’2018, 19-22 March  2018 Yasmine Hammamet, Tunisia.

[C3] Brahim Mrabet, Abdeljelil Mohsen Chammam “A Study of the Impact of a High-Pressure Sodium (HPS) Lamps on Power Quality” Electrical and Electronic Engineering (ICEEE), 2017 4th International Conference on April 8- 10 2017 in Ankara., Turkey at Gazi.

 [C4] Mrabet Brahim, Ahmed Mustapha Hussein , Fayez Fahim Elsousy Abdeljelil Chammam, “Assessment and Evaluation Method of Student Outcomes Developed for Graduation  Project Course in Engineering Program”, joint 8th IFEE2017 and 3rd TSDIC2017, Sharjah, United Arab Emirates, April 18 – 20, 2017 .

[C6] Mrabet Brahim, Ahmed Mustapha Hussein , Fayez Fahim Elsousy Abdeljelil Chammam : ‘Design and implementation of a direct and indirect assessment method of students outcomes for engineering courses’ 7th International Forum on Engineering Education (IFEE2015) SHAREQA, 17-19/03/2015,United Arabic Emirates.

 [C7] Walid Nsibi, Mohamed Nejib Nehdi, Abdeljelil Chammam, Brahim Mrabet,

Anis Sellami “High frequency electronic ballast for a high-pressure metal

halide lamp” 7th International Conference on Modelling, Identification and

Control (ICMIC), PP: 1 - 4, 18 - 20 December 2015, Sousse,

Tunisia, doi: 10.1109/ICMIC.2015.7409411.

[C8] A Chammam, B. Mrabet “Effects of Compact Fluorescent Lamps on

Power Quality of Electricity Distribution Networks” 14th International

Symposium on the Science and Technology of Lighting Systems, LS14,

Como Italie , 22-27 Juin, 2014.

[C9] W Nsibi, A Chammam, MN Nehdi, B. Mrabet, A Sellami, and G Zissis

“Influence of the pulsed power supply on sodium lamp” 14th International

Symposium on the Science and Technology of Lighting Systems, LS14,

Como Italie , 22-27 Juin, 2014.

[C10] W Nsibi, A Chammam, MN Nehdi, B. Mrabet, A Sellami, and G Zissis

“Dynamic Behaviour of HPS Lamp supplied by a non-conventional

Pulsed Current” 14th International Symposium on the Science and

Technology of Lighting Systems, LS14, Como Italie , 22-27 Juin, 2014.

Journal:

[J1] A Chammam, W Nsibi, B. Mrabet, MN Nehdi, G Zissis “Assessment of the

effect of a Pulsed Power Supply on HgTℓI Lamp: Experimental Investigation of

Energy Efficiency Lighting System” Lighting Research and Technology, Accepted 29 January 2018, Published 15 March 2018,  10.1177/1477153518760668.

[J2] A Chammam, W Nsibi, MN Nehdi, B. Mrabet, A Sellami“Effects of frequency dimming electronic ballast on a high-pressure mercury thallium iodide discharge”Journal of the Society for Information Display, Volume 24, Issue 3, pages 154–158, March 2016, doi: 10.1002/jsid.423.

[J3] A Chammam, W Nsibi, M NejibNehdi, B. Mrabet and A Sellami “Behaviour of

a high intensity discharge lamp fed by a high frequency dimmable

electronic ballast” Lighting Research and Technology, first published on May

25, 2016, doi: 10.1177/1477153516650234.

[J4] W Nsibi, A Chammam, MN Nehdi, B. Mrabet, A Sellami, G Zissis “HID lamps

under low frequency square wave operation: Experimental Evaluation of Dimming effects”Lighting Research and Technology, August 2017, doi:10.1177/1477153515622053.

Trainings

·      PSAU Board of Assessors Program

·      E-learning management system: Blackboard

·      Institute for the Development of Excellence in Assessment Leadership  (IDEAL)

·      Training on Power electronics and Electric machines.

·      Internal Reviewer Training

·      Program and Course Learning Outcomes Bases on NQF for medical, Science, Eng. and Humanities

·      Working Toward Program Accreditation 

·      Principles of quality management

·      Academic Accreditation of Programs

·      Designing Course folder

·      Self-Studies of Faculties and Programs 

·      Universities, Between

·      International Classification and Accreditation

·      Planning For Effective teaching

·      Motivating Students to learn

·      Active Learning: and teaching Large Classes

·      Websites Design Skills

·      Effective Teaching Skills

·      Development and evaluation methods of courses.

·      Training courses on design, realization, and the modeling of electronic power supply for low gas-discharge lamps and high pressure used for water treatment.

Study of electronic ballast for gas-discharge lamps

Activities for community service

(a) Membership of Institutional, National, or International Scientific

Advisory Boards

Name

Type/Grade

Period

External Advisory Board of College of Engineering

-       Member

-       In charge of annual meeting organization

12/2012

Up to now

Quality and Development  Board of College of Science at PSAU

-       Member

2016/2017

(b) Membership of Conference/Workshop/Forum Committees

Name

Place

Period

Organization committee of Quality Symposium of Salman bin Abdulaziz University

SAU-Alkharj-Saudi Arabia

5-6 /03/2014

Workshops for preparation to ABET accreditation

PSAU- Alkharj – Saudi Arabia

2011/2014

(c) Service as Reviewer

Journals

Name of Journal: Electrical Engineering.

ISSN No.:  0948-7921 

Publisher: Springer Berlin Heidelberg  

Conferences

CRATT, 2017, Tunisia

9th IEEE-GCC Conference and Exhibition 2017

Fourth Scientific Conference for Students of High Education, Makkah, Saudi Arabia, 2013

Fifth Scientific Conference for Students of High Education, Jeddah, Saudi Arabia, 2014.

(d) University Service

Name of, Country, Period (MM/YY-MM/YY)

Specify, Name of / /

Councils, Role

Institution/Country

Administrative Appointments/Committees-Boards/Period

University (PSAU) activities and  Committees/

Saudi Arabia

1-      Academic Accreditation Consultant for College of Computer Engineering and Sciences at PSAU.

2-      Member of the University Permanent Committee of KPIs (key Performance Indicators), since September 2016.

3-      Member of the University Steering committee of ABET Accreditation, 2011 to 2014.

-          Preparation and supervision of the plan of accreditation project targeting the achievement of ABET accreditation of six programs in both the college of engineering and the college of computer engineering & sciences.

4-      Member of the ABET Mutual executive & steering committee (between College of Engineering and College of Computer Engineering & sciences), 2011 to 2013.

5-      Institutional Developmental Assessment Project according NCAAA.

-          Member of Learning and Teaching Committee (Criteria#4 of SSR: Learning and Teaching), 2012 to 2014.

6-       Institutional Assessment Project according NCAAA.

-          Member of the Steering Committee at University level (Assessing all criteria of NCAAA), 2011

-          Head of the Assessment Subcommittee  (Assessing Criteria #10: Scientific Research and Criteria#11: Community Services), 2011

College (at PSAU) activities and Committees

1-      Member of the College Council, 2008 to present

2-      Coordinator of the College Academic Accreditation Committee.

-          Three programs are involved (EE, ME, CE).

-          Coordinate with the international and local academic accreditation consultants of the three Engineering Programs.

-          Organization of three four days visits of international consultants.

3-      College External Advisory Board (EAB)

-          Supervision of the creation of this Board

-          Organization of the three annual meetings of EAB held on 2012, 2014, and 2016.

4-      Committees:

-          Alumni Committee, 2016.

-          Community Services Committee, 2016.

-          Skills Development Committee, 2016

-          Quality Unit Coordinator –2010 to Present

-          Practical Training Committee, 2015 to present.

-          Brochures and electronic content Committee, 2015 to present

-          Strategic Plan Committee, 2012 to present.

-          Exams Committee, 2008-2010.

-          Advising Committee, 2008-2010.

-          Time table Committee 2008-2010.

-          Member of the College Council, since 2008.

-          Academic Accreditation Committee Coordinator 2010 to Present.

-          Academic Committee member 2010-2015

5-      Organization of workshops :

-          Blackboard System, 2016.

-          Preparation for ABET visit, September 2014

-          Preparation of ABET Self Study Report , Mai 2013

-          Program Outcomes /Student  Outcomes, 2012

-          Capstone Design Project, 2012

-          Assessment and Evaluation (Preparation of Survey Forms(, 2012

-          Mapping of CLOs and Course File Preparation, 2011

-          Course Syllabus design, 2011

-          Educational Objectives (PEOs), 2011

-          Vision, Mission and Program, 2011

-          Introduction to ABET Accreditation, 2011

-           

Department activities and Committees

1-      Member of the department Council, 2008 to present

2-      Academic Accreditation Committee

-          I Served as the ABET accreditation coordinator for the program.

-          I Drafted the Electrical Engineering Program self-study report.

-          I Developed Assessment instruments for the program to be used for ABET Accreditation.

-          I Managed all meetings and conferences call with the EE Program consultant.

-          I Supervised the Developmental Assessment Project of Electrical Engineering project according to NCAAA criteria, January 2012 to March 2016

3-      Committees:

-          Labs Committee,  since 2007 (I Actively participated in the installation of 12 Labs)

-          Advising Committee, 2010 to present.

-          Academic Accreditation Subcommittee, 2011 to present.

-          Recruitment committee 2010 to 2015.

-          EE Curriculum Committee 2008 to present.

(g) Service to Profession/Industry

                                                              

Name of Organization

Country

Role: Provide seminars for industrial companies

period

SAGEM

Ben Arous / Tunisia

Training employers on:

-Assembled surface components.

-Repairing of electronic cards

2005-2007

Chaquira Cables

Sijoumi /Tunisia

Power electronics Variable speed transmissions of the electrical motors

November / 2004

Peaudouce

Monastir / Tunisia

Training employers on Programmable Logic Controller-Siemens

May / 2003

Cement factory of Bizerte

Bizerte / Tunisia

Training employers on Safety measures in the electric installations

February / 2002

Aventis: Medicament factory

Tunis / Tunisia

Training employers on Instrumentation and Measurement

May / 2001

Elfouledh, Steel company

Bizerte / Tunisia

Training employers on Safety measures in the electric installations

March / 2001

ARCELIC: Electro-menager factory

Ben Arous / Tunisia

Training employers on Programmable Logic Controller-Siemens

January-March / 2000

(h) Public Service

-          Founding Member of "Alferdaws Association for Society Service" launched in 2013 year.

-          Member of National Automobile Club of Tunis – 1996-1999