تجاوز إلى المحتوى الرئيسي
logo
  • عربية
  • English
Login الرؤية الليلية
  • الإدارة العليا
    • مكتب مدير الجامعة
    • نشأة الجامعة
    • الرؤية والرسالة والأهداف
    • الهيكل الإداري
  • الوكالات
    • وكالة الجامعة
    • وكالة الشؤون التعليمية والاكاديمية
    • وكالة التطوير والجودة
    • وكالة الدراسات العليا والبحث العلمي
    • وكالة الجامعة للفروع
    • وكالة الجامعة لشؤون الطالبات
  • العمادات
    • عمادة شؤون القبول والتسجيل
    • عمادة السنة التحضيرية
    • عمادة البحث العلمي
    • عمادة التطوير والجودة
    • عمادة الدراسات العليا
    • عمادة الموارد البشرية
    • عمادة تقنية المعلومات والتعليم عن بعد
    • عمادة شؤون المكتبات
    • عمادة خدمة المجتمع والتعليم المستمر
    • عمادة شؤون الطلاب
    • معهد البحوث والخدمات الاستشارية
  • المركز الإعلامي
    • مركز الأخبار
    • الملف الصحفي
    • المطبوعات
    • صحيفة جامعتي
    • ألبوم الصور
    • ألبوم الفيديوهات
    • الفعاليات
  • مبادرات ومراكز
    • مركز المعلومات الإحصائية
    • حاضنة الأعمال
    • مركز الوثائق والمحفوظات
    • مركز تطوير التعليم الجامعي
    • المجلس العلمي
    • معرفة
  • المكتبة
    • مكتبات الجامعة
    • المكتبة الرقمية السعودية
  • القبول والتسجيل
  • عربية
  • English

Social

  •  
  •  
  •  
  •  
  •  
  •  
  •  
الرئيسية

مواقع أعضاء هيئة التدريس

  • الموقع الرئيسي للجامعة
  • أعضاء هيئة التدريس
  • الخدمات الإلكترونية
    • خدمات الطلاب
    • خدمات أعضاء هيئة التدريس
    • خدمات الموظفين
    • خدمات الزوار
    • بوابة الخدمات الإلكترونية
  • اتصل بنا
    • نموذج التواصل
    • أرقام هامة
    • خرائط الوصول

Breadcrumb

  1. الرئيسية /
  2. أعضاء هيئة التدريس /

أ.د.محمد ابراهيم محمد عبدالعال

Doctor of Philosophy in Mechanical Design and Production Engineering أستاذ قسم الهندسة الميكانيكية كلية الهندسة بوادي الدواسر
  • وادي الدواسر
  • 011-588-8734
  • mi.abdelaal@psau.edu.sa
  • السيرة الذاتية
  • الأبحاث العلمية

المؤهلات العلمية

  • Bachelor of Engineering Faculty of Engineering – Zagazig University Industrial and Production Engineering May 2000: Third of 50 students

  • Master of Science in Mechanical Engineering Faculty of Engineering, Zagazig University, Egypt 2005 Mechanical Design and Production Engineering Department

  • Doctor of Philosophy in Mechanical Design and Production Engineering Faculty of Engineering, Zagazig University, Egypt 2010 Mechanical Design and Production Engineering Department

الاهتمامات البحثية

  •  Production Technology.
  •  Fundamental of metal casting.
  •  Metal welding.
  •  Theory of metal forming.
  •  Theory of metal cutting.
  •  Design of cutting tools.
  •  Design of jigs and fixtures.
  •  Design of machine tools.
  •  Non-traditional machining.
  •  Sheet metal die design.
  •  Engineering materials.
  •  Measurements.
  •  Severe plastic deformation
  •  Engineering materials testing.

الخبرات

  • 2017 - حتى الآن - استاذ مشارك - كلية الهندسة بوادى الدواسر
  • 2021 - حتى الآن - استاذ - كلية الهندسة جامعة الزقازيق جمهورية مصر العربية
  • 2016 - 2021 - Assistant Professor - Assistant Professor in the Department of Mechanical Design and Production Engineering, Faculty of Engineering, Zagazig University, Egypt.
  • 2014 - 2014 - Postdoctoral researcher - Postdoctoral, Material Science and Engineering Department, Pohang University of Science and Technology, Pohang, Republic of South Korea.
  • 2011 - 2012 - Postdoctoral researcher - Postdoctoral, Material Science and Engineering Department, Pohang University of Science and Technology, Pohang, Republic of South Korea.
  • 2010 - 2016 - Lecturer - Lecturer in the Department of Mechanical Design and Production Engineering, Faculty of Engineering, Zagazig University, Egypt.
  • 2009 - 2010 - PhD student - PhD student in an integrated program in between the Department of Mechanical Design and Production Engineering, Faculty of Engineering, Zagazig university, Egypt and Material Science and Engineering Department, Pohang University of Science and Technology,
  • 2005 - 2010 - PhD student - PhD student in the Department of Mechanical Design and Production Engineering, Faculty of Engineering, Zagazig university, Egypt.
  • 2005 - 2010 - Assistant lecturer and researcher - Assistant lecturer and researcher in the Department of Mechanical Design and Production Engineering, Faculty of Engineering, Zagazig university, Egypt.
  • 2002 - 2005 - Instructor / research assistant - Master student in the Department of Mechanical Design and Production Engineering, Faculty of Engineering, Zagazig university, Egypt.

الأبحاث العلمية

  • Nahed El Mahallawy Farouk A. Shehata, Mohamed Abd El Hameed, Mohamed Ibrahim Abd El
  • Aal, "Effect of Cu content and number of passes on evolution of microstructure and mechanical
  • properties of ECAPed Al/Cu alloys" Mater. Sci. Eng. A 517, pp.46–50 (2009).
  • 2. Nahed El Mahallawy, Farouk A. Shehata, Mohamed Abd El Hameed, Mohamed Ibrahim Abd El
  • Aal, Hyoung Seop Kim,"3D FEM simulations for the homogeneity of plastic deformation in Al–
  • Cu alloys during ECAP" Mater. Sci. Eng. A 527, pp.1404–1410 (2010).
  • 3. Seung Chae Yoon, Anumalasetty Venkata Nagasekhar, Ji Hoon Yoo, Mohamed Ibrahim Abd El
  • Aal, Majid Vaseghi, Hyoung Seop Kim, "Deformation Characteristics Evaluation of Modified
  • Equal Channel Angular Pressing Processes" Materials Transactions, Vol. 51, No. 1 pp. 46 – 50
  • (2010).
  • 4. A. V. Nagasekhar, S. C. Yoon, J. H. Yoo, S.-Y. Kang,S. C. Baik, M. I. A. El Aal, H. S. Kim, "
  • Plastic Flow and Strain Homogeneity of an Equal Channel Angular Pressing Process Enhanced
  • through Forward Extrusion" Materials Transactions, Vol. 51, No. 5, pp.977 – 981 (2010).
  • 5. Mohamed Ibrahim Abd El Aal, Nahed El Mahallawy, Farouk A. Shehata, Mohamed Abd El
  • Hameed, Eun Yoo Yoon, Hyoung Seop Kim,"Wear properties of ECAP-processed ultrafine
  • grained Al–Cu alloys" Mater. Sci. Eng. A 527, pp. 3726–3732 (2010).
  • 6. Mohamed Ibrahim Abd El Aal, Nahed El Mahallawy, Farouk A. Shehata, Mohamed Abd El
  • Hameed, Eun Yoo Yoon, Jung Hwan Lee Hyoung Seop Kim" Tensile Properties and Fracture
  • Characteristics of ECAP-Processed Al and Al-Cu Alloys" Metals and Materials International, Vol.
  • 16, No. 5, pp. 709~716 (2010).
  • 7. Mohamed Ibrahim Abd El Aal, "Influence of the prehomogenization treatment on the
  • microstructure evolution and the mechanical properties of Al–Cu alloys processed by ECAP"
  • Materials Science and Engineering A 528, pp. 6946– 6957 (2011).
  • 8. Mohamed Ibrahim Abd El Aal, "The effect of the prehomogenization treatment on the fracture
  • characteristics and wear properties of ECAPed Al–Cu alloys" Materials Science and Engineering
  • A 539, pp. 308–323 (2012).
  • 9. Mohamed Ibrahim Abd El Aal, Eun Yoo Yoon, Hyoung Seop Kim, "Recycling of AlSi8Cu3
  • alloy chips via high pressure torsion" Materials Science and Engineering A 560, pp. 121–
  • 128(2013).
  • 10. MOHAMED IBRAHIM ABD EL AAL, EUN YOO YOON, and HYOUNG SEOP KIM,
  • "Microstructure Evolution and Mechanical Properties of Al-1080 Processed by a Combination of
  • Equal Channel Angular Pressing and High Pressure Torsion". The Minerals, Metallurgical and
  • Materials Transactions A 44, pp. 2581-2590 (2013).
  • 11. Mohamed Ibrahim Abd El Aal , Hyoung Seop Kim,"Wear properties of high pressure torsion
  • processed ultrafine grained Al– 7%Si alloy" Materials and Design, 53 pp.373–382 (2014).
  • 12. Mohamed Ibrahim Abd El Aal, Ho Yong Um, Kang Hyun Choi and Hyoung Seop Kim "Effect
  • of Homogenization Treatment on the Microstructure and Mechanical Property Evolutions of As-
  • Cast Al-Cu Alloy during High-Pressure Torsion" Materials Transactions, Vol. 55, No. 9, pp. 1405
  • – 1413 (2014).
  • 13. EUN YOO YOON, DONG JUN LEE, LEE JU PARK, SUNGHAK LEE, MOHAMED
  • IBRAHIM ABD EL AAL, and HYOUNG SEOP KIM "Effect of Post-annealing on Grain
  • Boundary of Nano-crystalline Cu Processed by Powder High- Pressure Torsion" Metallurgical and
  • Materials Transactions A 45A, pp. 4748-4752 (2014).
  • 14. Mohamed Ibrahim Abd El Aal, Ho Yong Um, Eun Yoo Yoon, Hyoung Seop Kim,
  • "Microstructure evolution and mechanical properties of pure aluminum deformed by equal channel
  • angular pressing and direct extrusion in one step through an integrated die" Materials Science and
  • Engineering A 625, pp. 252–263 (2015).
  • 15. Mohamed Ibrahim Abd El Aal, M. M. Sadawy, "Influence of the ECAP as a grain refinement
  • technique on the microstructure evolution, mechanical properties and corrosion behavior of pure
  • aluminum" Transactions of Nonferrous Metals Society of China 25, pp. 3865−3876 (2015).
  • 16. Mostafa A. Salem Ismail Ghazy El-Batanony Mohamed Ghanem Mohamed Ibrahim Abd El
  • Aal, "Effect of the Matrix and Reinforcement Sizes on the Microstructure, the Physical and
  • 3
  • Mechanical Properties of Al-SiC Composites" Journal of Engineering Materials and Technology,
  • 139(1), (2016).
  • 17. Adel Abbas Mohamed Adel Taha Mohamed Abbas Adham Ragab Ehab A. El- Danaf, Mohamed
  • Ibrahim Abd El Aal "Effect of Equal Channel Angular Pressing on the Surface Roughness of
  • Solid State Recycled Aluminum Alloy 6061 Chips" Advances in Materials Science and
  • Engineering (1–3), pp1-11(2017).
  • 18. Ho Yong Um, Byung Ho Parka, Dong-Hyun Ahn, Mohamed Ibrahim Abd El Aal, Jaechan Park,
  • Hyoung Seop Kim, "Mechanical and biological behavior of ultrafine-grained Ti alloy aneurysm
  • clip processed using high-pressure torsion" Journal of the Mechanical Behavior of Biomedical
  • Materials 68, pp. 203-209(2017).
  • 19. Mohamed Ibrahim Abd EL AAL, "3D FEM simulations and experimental validation of plastic
  • deformation of pure aluminum deformed by ECAP and combination of ECAP and direct
  • extrusion" Transactions of Nonferrous Metals Society of China 27 pp.1338−1352 (2017).
  • 20. Jing Guo Soo-Hyun Joo Dong-Hai Pi Xiaohui Zhang Xiaorong Zhang Mohamed Abdelaal
  • Yuepeng Song Hyoung Seop Kim, "Wear Resistance of the La62Cu12Ni12Al14 Bulk Metallic
  • Glass Under Dry Friction Conditions "Tribol Lett, 65:62(2017).
  • 21. Mohamed Ibrahim Abd El Aal "Effect of high-pressure torsion processing on the microstructure
  • evolution and mechanical properties of consolidated micro size Cu and Cu-SiC powders"
  • Advanced Powder Technology, 28, pp. 2135–2150 (2017).
  • 22. Mohamed Ibrahim Abd El Aal, H.S. Kim "Effect of the fabrication method on the wear
  • properties of copper silicon carbide composites’ Tribology International, 128, pp. 140–154 (2018).
  • 23. Elshafey Ahmed Gadallah, Mohamed Ibrahim Abd El-Aal, Rashad Mohamed Ramadan,Ahmed
  • Eassa El-Nikhaily "Effect of Parallel Tubular Channel Angular Pressing (PTCAP) Passes on the
  • Mechanical Properties of Copper Tube" American Journal of Science and Technology, 5(2),PP 35-
  • 41(2018).
  • 24. Min Ji Jang, Hyunjeong Kwak, Ye Won Lee, Youjin Jeong, Jahong Choi, Yong Hee Jo, Won‑Mi
  • Choi, Hyun Je Sung, Eun Yoo Yoon, S. Praveen, Sunghak Lee, Byeong‑Joo Lee, Mohamed
  • Ibrahim Abd El Aal, Hyoung Seop Kim "Plastic Deformation Behavior of 40Fe-25Ni-15Cr-
  • 10Co-10V High- Entropy Alloy for Cryogenic Applications" Metals and Materials International,
  • 25, pp.277–284(2019).
  • 25. Mohamed Ibrahim Abd El Aal, Mohamed Adel Taha, AI Selmy, AMEl-Gohry, HS Kim, "Solid
  • state recycling of aluminium AA6061 alloy chips by hot extrusion" Materials Research Express, 6,
  • pp. 036525. (2019).
  • 26. Mohamed Ibrahim Abd El Aal, "Wear properties of copper and copper composites powders
  • consolidated by high-pressure torsion" Friction, 8(2), pp.433–450. (2020).
  • 27. Mohamed Ibrahim Abd El Aal, "The influence of ECAP and HPT processing on the
  • microstructure evolution, mechanical properties and tribology characteristics of an Al6061 alloy"
  • Journal of Materials Research and Technology 9 (6), pp.12525–12546 (2020).
  • Work Presented in Conferences and Published in Local Journals
  • 1. F. Shehata, N. El Mahallawy, M Abd El Hameed and M. Abd El Aal "EDM NAD
  • CONVENTIONAL MACHINING OF PARTICULATE Al-SiC METALMATRIX COMPOSITE"
  • 4th INTERNATIONAL ENGINEERING CONFERENCE-FACULTY OF ENGINEERING, El
  • MANSOURA UNIVERSITY, SHARM EL- SHIEKH, April.
  • 2. F. Shehata, N. El Mahallawy, M Abd El Hameed and M. Abd El Aal "EFFECT OF KEROSENE
  • AND PARAFFIN OIL AS DIELECTRICS ON THEELECTRIC DISCHARGE MACHINING
  • CHARACTERISTICS OF AL/SIC METAL MATRIX COMPOSITE" Production Engineering &
  • Design For Development, PEDD7, Cairo, February 7 – 9, pp. 10-19 (2006).20-22, pp. 547-555
  • (2004).
  • 3. Mohamed Adel Taha Mohamed Abbas Mohamed Ibrahim Abd ElAal "Solid-State Recycling of
  • Aluminum Alloy (AA-6061) Chips via Hot Extrusion Followed by Equal Channel Angular
  • Pressing (ECAP) " EIJEST (2016).

تواصل مع قيادات الجامعة

أبناءنا الطلاب والطالبات، يسعدنا التواصل معكم واستقبال استفساراتكم من خلال نظام تواصل

تواصل
  • معلومات تفيدك
    • دليل الجامعة
    • التقويم الأكاديمي
    • جامعات محلية ودولية
    • البيانات المفتوحة
  • خارطة البوابة
    • التوظيف
    • خريطة الموقع
    • مواقع ذات صلة
    • أسئلة متكررة
    • النسخة السابقة للبوابة
  • الأتمتة والتحول الرقمي
    • الدعم الفني للخدمات الإلكترونية
    • فريق البوابة الإلكترونية
    • تقنية المعلومات
  • السياسات والإجراءات
    • سياسات البوابة
    • المناقصات

إدارة العلاقات العامة والإعلام

  • للاتصال من داخل الجامعة 1200
  • للاتصال من خارج الجامعة 011-588-1200
  • البريد الإلكترونى pr@psau.edu.sa
  • لطلب خدمة وفتح بلاغ للأعطال ithelp.psau.edu.sa

© جامعة الأمير سطام بن عبد العزيز 2022

  •  
  •  
  •  
  •  
  •  

تصميم وتطوير عمادة تقنية المعلومات والتعليم عن بعد